Replaces
Part Details
TRQ side mirrors and mirror components are designed to match the function, fixture, and performance of the original version for easy installation. TRQ mirrors are DOT certified, comply with all federal safety standards, and are independently lab tested to ensure our products comply with all government regulations. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Exact fit - To obtain proper fit and function confirm your vehicle has the exact mirror options listed.
Paint To Match Note:
"Paint-to-match finish" refers to a smooth, paintable surface. This item is not painted. Paint offers better coverage and adhesion, but it is not necessary for installation.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the side mirror on this 2004 Ford Crown Victoria. We show you on the passenger side, but the driver side is a similar procedure. The items you'll need for this are a new side mirror from 1AAuto.com, a flat blade screwdriver, 7mm socket and ratchet, T30 Torx bit, 7/16"? socket, Phillips screwdriver, pliers, and a razor blade.
Using a flat blade screwdriver, pry up the switch panel and then pull directly up. Then, push the tab on these harnesses and disconnect both of them. Pry out this panel behind the door handle and then, remove the T30 bolt. We'll just fast forward as Don does this. Now, lining the outside of the door panel, there are three 7mm bolts. Just go ahead and remove each of those. Pry off this triangular panel and then remove this 7mm bolt in here. Now, you can lift the door panel up and off. Next, you want to remove your speaker. Just remove these three Phillips screws. We'll fast forward as Don does this. Pull your speaker out, and push the tab on the harness and pull it free. Pull back your water shield.
Now, you want to peel this panel off and it will peel until it gets to the clip at the bottom. You can try to pull the clip out just by hand. We end up using a pair of pliers to pull that out. Then, using a razor blade, you just want to cut little X's into where you can feel that there are holes and then push it through. Now, you can remove these three 7/16"? nuts. Now, push the harness clip through and then pry out on the tab and pull the harness free. Now, you can pull your mirror up and out.
On the right is the old side mirror; on the left is the new one from 1AAuto. You can see they're identical and they'll mount exactly the same. Feed the harness for your mirror through and then push the studs through the door. We'll fast forward as Don replaces those three 7/16 nuts. Reconnect your harness and push that clip back into the door and then replace your water shield.
Reconnect your speaker. Push it back into place and then, replace those three Phillips screws. We'll just fast forward as Don does this. Now, push that clip back into the door and push that panel into place. Now, to replace your door panel, put those lower hooks into place, and then push your harnesses up through that switch panel hole. Then, line up those other hooks and push the door panel back and down over that lock rod and down into the window seal. We're just going to fast forward here as Don replaces the three 7mm bolts along the outside, the 7mm bolt inside the door panel, and that T30 bolt. Replace that triangular panel. Replace that panel behind the door handle and reconnect your harnesses. Put the back end of the switch panel in first and push down the front, and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
