WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Power Door Lock Switch 2003-08 Ford Crown Victoria
Created on:
Tools used
Flat Blade Screwdriver
1. Removing the Switch Panel
Pry up the switch panel with a flat blade screwdriver
Disconnect the door lock wiring harness
Disconnect the window switch wiring harnesses
2. Removing the Door Lock Switch
Pry out the tabs on the back of the door lock switch with a flat blade screwdriver
3. Installing the New Door Lock Switch
Push the door lock switch into place until it clicks
4. Installing the Switch Panel
Connect the door lock wiring harness
Connect the window switch wiring harness
Push in the window switch panel
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace a door lock switch on this 2004 Crown Victoria. We show you on the passenger side, but the driver side is a similar procedure. The only item you'll need for this is a flat blade screwdriver.
Using a flat blade screwdriver, just pry up the switch panel and pull straight up to release that last clip. Then push the tab on both of these harnesses and pull them free. Now pry out the tabs on the back of the switch here.
There are two of them: one on each side. You just want to pry them out and pull the switch up. You can also push on it from the other side.
Push your new switch into place, then reconnect your two harnesses, and then push the back end of the panel in first, and then push it down into place and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
SWA41635
In Stock
Product Reviews
Loading reviews
5.00/ 5.03
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
power door lock switch
P
October 5, 2019
Great fast service. Door lock switch was a perfect fit.. Very helpful videos too.
First timer
S
February 21, 2020
Was very pleased, part was delivered when it was supposed to and with no problems. Will order from them again
A+
Scott
July 14, 2021
Worked perfectly and priced right.
Customer Q&A
My crown vic has keyless entry pad. Is this the correct part for the driver door lock switch?December 19, 2015
James O
10
Yes as long as you have power locks and your vehicle is listed in the fit then this will work for your application. Thank you!
December 23, 2015
Derek C
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.