Replaces
Part Details
Highest Quality Materials
Made from highest quality materials that meet or exceed OEM standards
Quality Tested - built to a strict level of product standards.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com-- Your source for quality replacement parts and the best service on the internet.
Hi. I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20- plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly. That's going to save you time and money. Thank you and enjoy the video.
In this video I'm going to show you how to remove and install the heater and AC blower motor on this 98 Explorer. The motor is the same for 95 to 05. This procedure will be exactly the same for any 95 to '01; it should be pretty similar for the 02 to 05 as well. Tools you'll need are eight, 10, and 11-millimeter sockets with ratchet and extension and a flat-blade screwdriver.
We're looking under the hood here at the passenger side. First thing we're going to do is remove this little guy which I believe is the server motor for your cruise control. Use the 10-millimeter socket or wrench. Once you get the bolts out, shake it out and put it right up there for now. When we have that aside, you're actually going to want to unbolt your radiator bottle and washer-fluid bottle, which means that first, you have to remove your air box. First, you just want to undo the clips here on each side, then your air box comes up and slides over and then you can lift it up and out. I'm just going to kind of move it over here a little bit. Now, you can just lift your air cleaner up and out. Your air box is actually just into some rubber grommets, here and here and also you can see right into the fender here and here.
To get your air box out, what you're going to want to do is just grab hold of it and you pull up really firmly and it'll pop. Now take a screwdriver and put it under here; that will help you to pop this one out kind of lifting up on that screwdriver, lifting up on my air box and then that one pops. Now, you pull it out this way from the fender. You can actually take out ... off these rubber grommets. You could see, here's the things on the bottom that hold it into the bottom. I would take these grommets and put them back into the fender here.
Now we're going to remove the four nuts and bolts that hold the washer and radiator bottle in place. One there, one there. One right in there and then one right down there. Interesting to note that the nuts that go down onto the fender, the lower nuts are 11 millimeter and then the two bolts that go in to the side of the fender are actually 10 millimeter. I'll quickly just remove those. Once you have them bolted, you just want to lift it up, off the studs and then just slide forwards some just to give yourself a little more room to get to the blower.
Here's your blower motor. You want to disconnect your harness here, just like that. This tube here, just a rubber band kind of, just like that and it comes away. You have four eight-millimeter bolts, one, two, three and then way down there, four. Now you can pull your motor, bring it up, put your harness out of the way; you should see it comes up and out. Here's my original motor, new motor from 1AAuto. You could see the connections are all the same. It does come with a gasket and then it's going to bolt in exactly the same. This motor is actually fine so I'm going to reinstall my original. Symptoms of a motor going bad is it starts making a groaning or high-pitched whining noise and that changes with the different speeds of the fan setting. When you start hearing that, that's when it's time to get a new motor.
You can take this rubber boot out of here and then put your motor down and in. Make sure that the harness isn't caught up behind there. There's little pins here that the motor goes onto, right there and right there. You locate it and now you can put your bolts in and tighten them up. You can take your rubber boot; it goes on right down here. Stick that rubber band around and push it into the side of the motor where it goes. Reconnect your harness attachment. Now you can move your coolant and radiator bottle back in place. Bolt them on. Reinstall the air box, put it in, push the two pins into the fender here. Feel underneath for where the other ones should be going into, locate them, push that down in and put your air cleaner down in. One of these clips is broken. Push the top of the air box over, get the three pins here. Push it down, clip it on, clip it on. Move our cruise servo back into place and you're all set.
We hope this helps you out. Brought to you by www.1AAuto.com- your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free, 888-844-3393. We're the company that here for you on the internet and in person.
Tools used
Hi, I'm Mike from 1A Auto. We've been selling auto parts for over thirty years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by our 100% satisfaction guarantee. We've created thousands of videos to help you install our parts with confidence. That saves you time and money, so visit us at 1AAuto.com, your trusted source for quality auto parts.
In this video, we're going to be working with our 2001 Ford Ranger, 4.0 liter, V6. We're going to show you how to remove and replace your blower motor resistor for the blower fan responsible for getting hot air or A/C through your vents.
If you like this video, please click subscribe. We have a ton more information on this truck as well as many other makes and models and if you need this part for your vehicle, you can follow the link down in the description over to 1AAuto.com. Here are the items you'll need for this repair.
Your blower motor resistor is located at the back passenger side of the engine bay on the bottom of the heater box. While it is accessible from the top side, we already had our fender liner out and it was a lot easier to access it, so we'll show you how to do it that way. The removal process for the connector and the bolts will be the same whether you do it from above or below.
Using the taped flat blade screwdriver, locate the relief cuts in the hubcap. Stick the screwdriver in and pry out to release it from the wheel. This particular truck has a wheel lock on it, so we'll need the wheel lock key in order to remove it. Otherwise, the rest of the nuts come off with a 19 millimeter socket and breaker bar. Simply crack them loose for now. Then raise and support your vehicle and remove the lug nuts the rest of the way. Remove the wheel from the vehicle.
Remove this 7 millimeter bolt on the mud flap. Using a pair of side cutters, we'll reach under these plastic clips. Be careful not to cut them. Simply grab it and pry it out. Remove the remaining two 7 millimeter bolts from the bottom side of the mud flap. Move these three 5.5 millimeter screws with a socket ratchet and extension. Remove these four 8 millimeter bolts with a socket and ratchet. Remove this plastic clip at the back outer side of the fender. Work the inner wheel liner out of the fender. Remove the vacuum lines on the vacuum reservoir inside of the wheel well, and fully remove the wheel well from the inside of the car.
With the inner wheel well liner removed, the blower motor resistor is much more easily accessible here at the bottom of the heater box. Our blower motor resistor has clearly been removed before because normally there's a clip here that secures the connector onto the bottom of this resistor. It's twin is located on the top side here. Normally you would have to release both in order to be able to remove the connector. We're going to use a small flat blade screwdriver to pry up on the tab that we do still have intact. Remove the connector and using an 8mm socket and ratchet, remove the two screws on either side of this resistor.
Here we have our old blower motor resistor that we removed from our vehicle and our new part from 1AAuto.com. These parts are exactly the same, see we have the same coils here, as resistors, as well as the same resistor here. We have the same two bolt mounting locations and the same pattern where it actually sits into the heater box. Flip it over, you can see that we have the same four pin connector on each with the same blades here to lock our connector onto. If your blower motor is only working on certain higher speeds, it's likely that your blower motor resistor is to blame. This new part from 1A Auto is going to go in direct fit just like our original equipment and fix you up right.
Reinstall your blower motor resistor into the heater box. Start your two 8mm screws. We'll tighten these screws down with an 8mm socket and ratchet. Reinstall your electrical connector and you're ready to put the wheel liner back into place if you removed it for this repair.
Reinstall the wheel well liner into the car. Reinstall the four 8 millimeter screws for the socket ratchet and extension. Reinstall the three 5.5 millimeter screws. Reinstall the bottom outside edge. Place the clip into the opening at the bottom of the fender. Line up your mud flap onto the bottom of your fender, and reinstall the plastic clips: one on the side and one on the top here. Reinstall the three 7-millimeter screws.
Reinstall the wheel and tire, and start your lug nuts by hand. With the weight of your vehicle on the tires, torque the lug nuts to 100 foot-pounds in a cross pattern. Line up the tabs on the inside of your hubcap to the lug nuts. Tap it back into place.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing or maintaining your vehicle. I'm going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly: that's going to save you time and money. Thank you and enjoy the video.
In this video, we replace the blower motor resistor. The symptoms of one of these going bad is that your fan will work at certain speeds but not at others and it's a pretty easy replacement. The tools you'll need are 8,10, and 11mm sockets with ratchets and extensions. That's all you should need after that the resistor should unplug and you should be able to replace it but as you'll see on our vehicle and probably on a lot of vehicles, they corrode and we ended up using a flat blade screwdriver and pliers to basically ruin the old resistor and break it apart to get it unplugged.
Inside the truck, turn the key on. Now, turn the ventilation on and if you listen really carefully you can hear the fan going. You can hear it go faster. Now, when I go from two to three, you can hear that it doesn't really do anything. When I go to four, obviously, it really winds up. There's nothing from two to three. Actually the first time I got in this, when I turned it on there was actually no fan, one, two and three and then four it started working and the other speeds started working so that was an indicator that my blower resistor was starting to go bad.
First, we're going to unbolt our radiator and washer fluid jar and just move it forward to give ourselves a little extra room back here and it's four bolts: one there, one there, another one on the side and then another one down there. Use a little penetrating oil, coat those two nuts down low/ Those are 11mm and I'm going to speed it up here as we remove those two and then the bolts that are up on the fender, the ones up higher, are 10mm and we'll remove those as well. We're just going to pull this up and push it forward some.
With that bottle out of the way, our resistor is this part right down here. What we're going to want to do is just to give ourselves a little room is we'll disconnect our fan connection here and then you'll see this little rubber, almost a rubber band, take that off, which allows you to pull this tube out and off and then just gives you a more clear shot. You can see there's one screw right there, 8mm, and there's another one on the other side, 8mm. Use an 8mm socket with a ratchet and extension. This far one's the most difficult and I'm sure I'm blocking your view but just get your wrench down there on it. I'm just going to speed up as I go to remove those two 8mm bolts and one tip is to remove them most of the way with a wrench as they start getting easy reach down in there with your fingers and take them out the rest of the way so you don't drop them. Once you get them a certain way out, you can reach in with your fingers, you want to avoid dropping them. Then pull the resistor straight out. Now, obviously, you have to disconnect the resistor from the harness and on this vehicle and probably on most vehicles, they corrode very badly and it makes it very difficult to get the resistor apart. I'm actually just showing you the end here, what you can see is the resistor, it's already broken into a few pieces. You can just see I'm prying it off. I used needle nose pliers and other pliers and basically just broke all the plastic around the resistor. Now you don't want to break the plastic that's part of the wiring harness of the car, you just want to break the plastic around the resistor and then get a screwdriver in there and pry the connection out. You can see here I bring in an even bigger screwdriver, it's just really difficult to get that apart and then I end up really breaking the resistor up and then grabbing some pliers to get the rest of it out. Now with the resistor out, I still have a little piece of the plastic housing that it's plugged into that I broke away and then it's just a matter of actually pulling that off with my hands. Now here just use some more penetrant, spray right into the terminal. It just cleans things out.
The new part from 1A Auto goes right in, plugs in. You can see that's how it should come apart. It goes right down. As you're putting it down and in, you will notice the resistor is shaped a certain way and there are little rectangles on the housing and so the resistor only goes in one way. You get it in and get one of the bolts started. I'll fast forward here as I'm starting those bolts and use my 8mm socket with my ratchet and extension to tighten them up. You want to be careful, don't tighten them up too much you don't want to strip the plastic housing. If you do that then the bolts won't hold the resistor in there very well. When you tighten them up just get them to a firm point where you can start feeling them give some resistance and then that's enough. Push the vent tube into the motor, on there and reconnect our fan motor.
Turn the key on, turn the system on. Test: one, two, three, four. Looks good. Again, we'll go into light speed here as we put the radiator and windshield washer bottle back in. Again, the two bolts that go into the fender are 10mm, the two nuts that are down lower are 11mms. Tighten those up. Again, don't over-tighten them, nice and firm and you should be good.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my twenty-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts, installed correctly that's going to save you time and money. Thank you, and enjoy the video.
In this video, we're going to replace the blower motor resistor in this Explorer. You know if you're having a resistor problem if your fan works , you know, say it works on low, but it doesn't work on two and three, and then it works on high, that's usually a sign that your resistor's gone bad. Or it works on some speeds except for high or low, or something like that.
The tools you'll need are basically the same as for the blower motor. You got to remove the blower motor and then get the resistor.
Okay, so we're looking under the hood here, at the passenger side. And first thing we're going to do is remove this little guy, which I believe is a servo motor for your cruise control. Just a 10mm socket or wrench. Once you get the bolt out, kind of shake it out. Put it right up there for now. Now that you have that aside, you're actually going to want to unbolt your radiator bottle and washer fluid bottle, which means that, first, you have to remove your air box.
So first you just want to undo the clips here on each side. And your air box comes up and slides over, and then you can lift it up and out. I'm just going to kind of move it over here a little bit. Now you can just lift your air cleaner up and out. Okay, and then your air box is actually just into some rubber grommets here and here, and also, you can see, right into the fender here and here. So to get your air box out, what you're going to want to do is just grab hold of it and you pull up really firmly and one will pop. And now take a screwdriver and put it under here and that'll help you to pop this one out. Kind of loosen on that screwdriver. Loosen up my air box. And another one pops. Okay, and now you pull it out this way from the fender. Okay. Then you got to take out, off these rubber grommets. And you can see here's the things on the bottom that hold it into the bottom. And I'm going to take these grommets and just going to put them back into the fender here.
Okay, now we're going to remove the four nuts and bolts that hold the washer and radiator bottle in place. One there, one there. Okay, one right in there, and then one right down there.
Okay, and interesting to note that the nuts that go down onto the fender, the lower nuts, are 11 mm, and then the two bolts that go into the side of the fender are actually 10 mm. So I'll quickly just remove those. And once you have them unbolted, you just want to lift it up. Pop the studs. And then just slide forward some just to give yourself a little more room to get to the blower. Okay, now here's your blower motor. You want to disconnect your harness here, just like that. Then this tube here, just a rubber band, kind of, that goes like that and comes away, and then you have four 8mm bolts: one, two, three, and then way down there, four. Now you can pull your motor right up. Get your harness out of the way. And it comes up and out. Okay, now with the motor out of the way, you can see right down here is your resistor, and there's an 8mm bolt right here that you want to take off. Okay and there's another bolt right over here.
Okay, now your resistor comes up and out, and basically the harness is pronged with two tabs, and you want to just kind of pull. Try and work your thumb underneath each tab, and pull. And then on the opposite side, you may want to use, take a screwdriver, work it under one of the tabs. Pull some. Get your finger under the other tab, and pull. Okay, and there are a few adjectives and adverbs I used during this, but really it's just a matter of working it in there and pulling it really hard and then you'll eventually get it apart.
Should just be, the plastic is coming out but the, there we go.
Okay, looking inside the contacts in this resistor, you can see, especially this one up here getting pretty rusty. And that's what happens, they get pretty rusty and then they take too much, they give too much resistance, and the fan doesn't work at certain speeds. Now this one is still working okay, so I'm going to put it back in. Okay, and you can see, can't really do this incorrectly. Plug it back in. Okay, and I'm going to just kind of speed up through putting it back in 'cause it's just a matter of plugging it back in and then putting it down in there and bolting it up. And then once you get them pretty close.
Okay, tighten them up. They don't have to be incredibly tight, but they should be nice and snug. Okay, and I'm going to kick it into lightning speed here and just fast forward through reinstalling the blower motor and getting everything back in place. If you want to see this in regular speed, just check out our video on removing and replacing the blower motor in an Explorer. Or, if you want, you can just follow my lightning fast hands and probably glean enough information from this to do it. But, yeah, once this is done in a little bit, we appreciate it, and we hope this helps you out.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll free: 888-844-3393. We're the company that's here for on the Internet and in person.
