Replaces
Frequently bought together
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you a tailgate replacement on this '03 F-250, same as most Super Dutys of this era. It is a pretty easy task. You just need a T45 Torx driver with a ratchet handle. Obviously, in this video I show you how to do one side. The other side is basically the exact same procedure, and we always recommend that you replace them in pairs.
Here are the tailgate cables. It's pretty easy. T45 Torx bit with a ratchet handle. Make sure that you either have a good cable on the other side, or that you support your tailgate so that it doesn't fall down and dent. A screwdriver or your finger, pull that tab up, take the old cable off.
The new cable going out on, right down on, just like the old one. Okay, I like to use the old guide, so that's just a little kind of washer that will move. Take this guide off, okay, put the new bolt through. The larger leg of the guide goes into that slot, there. Slip it on that way. Insert that. Make sure you get the guide slot into the tailgate. Insert that. Okay, the bolt is shouldered, so make sure that you pull your tailgate cable out onto the shoulder. Right off, firmly.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
