Replaces
Part Details
Install Tip: Keep & reuse your original hardware, new hardware is not included with this item.
Item Condition:
New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
In this video, we show you how to replace the hood support struts on this 2002 Mercury Sable. It's a pretty easy repair. This will happen when your hood won't stay up anymore. You'll especially notice it in colder weather. The only tool you'll need is a flat-blade screwdriver and possibly a mop or something, whatever you might hold it up with, or a person to help you out.
If you're familiar with the old Swiffer mop holding up your hood, then you'll want to perform this repair. You'll want to replace these hood struts. It's pretty easy. You take a flat blade screwdriver. Just a note here: You do need to have your hood supported, because when you take these hood struts off your hood will fall down quickly. So have either a dust mop or an assistant help you out. Use your screwdriver; pry out the clip and pull off the strut. Do the same thing for the top side.
The new strut from 1A Auto goes on the exact same way. Put it on there. You may have to turn the strut just a little bit. Lift up your hood. Put the other one on. Make sure it's locked on there. Once you've replaced the pair, you can take out your dust mop.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
