Install Tip: Keep & reuse your original hardware, new hardware is not included with this item.
Item Condition:New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Hood Lift Support 2000-05 Mercury Sable
Created on:
Tools used
Flat Blade Screwdriver
Assistant
Block of Wood
1. Removing the Hood Support
Support the hood with a piece of wood or have an assistant support the hood
Pry off the clip at the bottom of the hood support with a flat blade screwdriver
Pull off the bottom of the hood support
Pry off the clip at the top of the hood support with a flat blade screwdriver
Pull off the top of the hood support
2. Installing the New Hood Support
Push the top of the hood strut into place
Push the bottom of the hood strut into place
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
In this video, we show you how to replace the hood support struts on this 2002 Mercury Sable. It's a pretty easy repair. This will happen when your hood won't stay up anymore. You'll especially notice it in colder weather. The only tool you'll need is a flat-blade screwdriver and possibly a mop or something, whatever you might hold it up with, or a person to help you out.
If you're familiar with the old Swiffer mop holding up your hood, then you'll want to perform this repair. You'll want to replace these hood struts. It's pretty easy. You take a flat blade screwdriver. Just a note here: You do need to have your hood supported, because when you take these hood struts off your hood will fall down quickly. So have either a dust mop or an assistant help you out. Use your screwdriver; pry out the clip and pull off the strut. Do the same thing for the top side.
The new strut from 1A Auto goes on the exact same way. Put it on there. You may have to turn the strut just a little bit. Lift up your hood. Put the other one on. Make sure it's locked on there. Once you've replaced the pair, you can take out your dust mop.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
GSA47388
In Stock
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Mercury is a registered trademark of Ford Motor Company. 1A Auto is not affiliated with or sponsored by Mercury or Ford Motor Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.