Replaces
Part Details
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet. Hi, I'm Mike Green, I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20 plus years experience restoring and repairing cars and trucks like to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly that's going to save you time and money. Thank you and enjoy the video.
In this video, we're going to show you how to replace the fog light on this 2002 GMC Sierra, this procedure is the same for any 2000 to 2006 Yukon or Yukon XL and '99 to '02 Sierra. The only tool you'll need is a 10 mm socket and ratchet or wrench. The common issue with these trucks is the fog lights get wiped out, like this one is here so we'll show you to replace them. The nice thing about these trucks is you don't have to jack them up or anything. I do have this up on a lift just to make it a whole lot easier to video but you're going to look right up underneath. First, you can disconnect your harness, just by pulling up on a little tab right here and then back, and then there's two 10 mm bolts up on top. Let's see if I can get to them. You remove this one here and there's one closer to the outside.
Once you have it unbolted, just push it forward, push this dam forward a little bit and pull it down and out. Obviously here's the one for the truck, a nice new one and it will look a whole lot prettier. I need to get the bolts out of this old one first, just going to use a set of needle nosed pliers and I'm going to pry it up and out and then the next thing is you just want to use your old one to kind of preliminary aim the new one and all's you want to do is measure how far this is and set your new one to the same distance. All's you do is just crank up on this nut here until you kind of are at the same distance, a little bit more. Now you're ready to install. I put my bolt into the new one. Put it into place. Start our bolt here. Put our other bolt up in, just push them down, wiggle them a little bit and then start them in. Then use our wrench. Once it's tight, you can plug it back in and now we can see that the new light works just fine.
We hope this helps you out. Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for you on the internet and in person.
Tools used
This video is brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet. Hi, my name is Mike Green. I want to help you save time and money repairing your vehicle. I have 20+ years experience restoring and repairing cars and trucks. My company, 1A Auto, sells high quality replacement parts over the internet. In this video I will be showing you how to install these parts. By the end of this video, you will know how to install them and where to get them, and that is going to save you time and money. Thank you and enjoy the video.
In this video, we are going to replace the parking light on a 2004 Sierra 2500, which is basically the same as any 1999-'06 GMC Sierra. This is a pretty easy process, it doesn't require any tools. There is two pins that hold the headlight in, right there and there, and you'll twist those out and pull them up. Then the headlight basically comes right out and then once it is out, you can reach in behind and unplug the lights. They're basically just little teeth that you can pull with your thumb and they unplug. Then the parking light is actually snapped in. There is a little bracket that goes into the side there, and then a little piece that you squeeze and snap out there, and you can see it, switch hands here and I'll push on that tooth and the light will pop out.
Then you just pull it forward and twist out the bulbs, and you can now service either those bulbs or if you need to replace the whole parking light because it got damaged or broken, you can do that. Then to install is the reverse of the procedure, insert the harnesses and twist to lock in. Side marker light and you want to get the inside tooth in there first. Then you can see that at a little better angel here. That just presses right into that slot and locks in. Then you re-install your headlight. At this time, just to show you, you can service the headlight bulbs if you want to, just twist and pull them right out. That's the high beam, same thing with the low beam. They just twist and pull right out. If you were replacing that headlight, you can see that black bracket, you might be able to bolt that on to the new headlight or if you headlight assembly comes with that whole thing, then it just goes in that easily.
Just place the light back into place and use your pins, twist them into place and lock them and there you are. You've just replaced the parking light and we will do a quick test. The running lights, the low beams, high beams, and signals just to make sure and you see actually our side marker light is not working, so we will actually go back in and replace that small bulb and fix that side marker light.
We hope this helped you out and thank you very much. This video was brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Feel free to call us toll free, 888-844-3393, we are the company for you on the internet and there for you in person too. Thank you very much.
