Replaces
Replaces GMC Front Passenger Side Lower Side Marker Light Eagle Eyes GM157-U000R
$12.55
Replaces GMC Front Driver Side Lower Side Marker Light Eagle Eyes GM157-U000L
$12.30
Replaces GMC Front Driver Side Upper Reflector Eagle Eyes GM156-0000L
$12.14
Replaces GMC Front Passenger Side Upper Reflector Eagle Eyes GM156-0000R
$5.65
Part Details
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Created on:
Tools used
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. So visit us at 1AAuto.com, your trusted source for quality auto parts.
In this video, we're going to be working with our 1996 GMC Sierra. We're going to show you how to remove and replace your vehicle's front side marker lights.
If you like this video, please click "subscribe." We have a ton more information on this and many other vehicles. If you need these parts for your truck, you can follow the link down in the description over to 1aauto.com.
Here are the items you'll need for this repair: 13mm wrench and Phillips head screwdriver
Remove the four Phillips head screws on the outside edges of your turn signal. We'll do this using a Phillips head screwdriver. Once the screws are out, you can pull the housing forward and remove the electrical connectors. Repeat these steps on the opposite side.
To remove the lower turn signal, you'll want to turn the bulb socket sideways and remove it. It comes out just like a reflector does, with two 13-millimeter nuts or 1/2-inch nuts. You'll want to remove those with a ratcheting wrench if you have access to one. Otherwise you'll just have to work them off with a regular box or open-end wrench. Repeat these steps on the opposite side.
Here we have our old side marker lights that we removed from our truck and our new parts from 1aauto.com. As you can see, these parts are exactly the same size and shape. Our old ones are faded and foggy. They're not going to let a lot of light through. This one's cracked. It looks like it's been hit with something. Our new ones are in great shape, nice and bright and clear. Same two bulb mounting location on the back of all of these, along with the same bulb socket on all four pieces. If your old side marker lights have cracked, broken, or faded, these new parts from 1A Auto are going to go in direct fit, just like your original equipment and fix you up right.
Install the light into the side marker, as well as your two 13-millimeter nuts. Tighten those down with a 13-millimeter ratcheting wrench. Repeat these steps on the opposite side.
Reinstall the lights into the turn signals. Install them into the grille, along with the four Phillips head screws. Repeat these steps on the opposite side.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Tools used
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. So visit us at 1AAuto.com, your trusted source for quality auto parts.
In this video, we're going to be working with our 1996 GMC Sierra. We're going to show you how to remove and replace your vehicle's front, upper reflectors. If you like this video, please click subscribe. We have a ton more information on this and many other vehicles, and if you need these parts for your truck, you can follow the link down in the description over 1AAuto.com.
Here are the items you'll need for this repair.
Remove the two 3/16 screws securing the headlight in. These come out of the top of the grill. We'll do that with a socket, ratchet, and extension. Remove the headlight from the vehicle, and disconnect the headlight bulbs. Repeat these steps on the opposite side. To remove the upper reflector, use a 13 millimeter or a half-inch wrench. If you have access to a ratcheting wrench, this is a great opportunity to use it. You'll want to remove the two nuts on the back. These are just plastic body nuts, there's not much tension on them. You can then pull the reflector out of the grill. Repeat these steps on the opposite side.
Here we have our old side marker that we removed from our vehicle, and our new part from 1AAuto.com. As you can see, these parts are exactly the same, we have the same size and shape. Our new reflector is nice and bright, where the old one is dim, and not going to reflect a lot of light out of it. Same mounting bracket on the backside, and the same two studs. These are actually body nuts, so they'll cut the threads as we turn them on here. So if your old side markers are cracked, broken, or faded like these, this new part from 1A Auto is going to go and direct fit just like your original equipment, and fix you up right.
Install the reflector, and the two 13 millimeter body nuts. Tighten them down. A 13 millimeter ratcheting wrench, or whatever you can get in there with. Reconnect your headlights. Reinstall them, and reinstall the 3/16 bolts. Repeat these steps on the opposite side.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
