Replaces
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to service the bulbs as well as replace the entire fog light assembly on this 2003 GMC Envoy. It's the same part and similar process on the regular Envoys on all the models made after 2002. The items you'll need include new fog lights from 1AAuto.com and a 10mm socket and ratchet.
Reach up behind the back of your fog light. Push down on this tab and disconnect the harness. Then you can just service the bulb by twisting it counterclockwise, pulling it out, twisting your new one in, and turning it clockwise to lock it.
Now to remove the entire assembly, you just want to remove these three 10mm nuts. We'll fast-forward as Mike does that. Now push the fog light from behind until you can grip it from the front and pull it up the rest of the way.
On the left is the old fog light; on the right is the new one from 1A Auto. You can see they're identical, and they'll fit exactly the same. Take your new fog light, push it back into place until those studs pull through, and then replace those three 10mm nuts, tighten them up, and reconnect the harness. Then you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
