Replaces
Replaces 1992-95 Toyota Pickup 4 Wheel Drive Driver & Passenger Side 2 Piece Corner Light Set TRQ SLA88426
$61.95
Replaces 2001-03 Toyota Sienna 4 Piece Lighting Kit DIY Solutions LHT04161
$88.95
Replaces Toyota 4Runner Pickup Driver & Passenger Side 2 Piece Parking Light Set DIY Solutions LHT05285
$40.95
Replaces Mercedes Benz Freightliner Driver & Passenger Side 2 Piece Corner Light Set DIY Solutions LHT05440
$45.95
Replaces Ford Driver & Passenger Side 2 Piece Performance Parking Light Set Eagle Eyes FR271-U0AW2
$36.95
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to service the bulb as well as replace the entire corner light assembly on this 2003 GMC Envoy XL. It's the same part and similar process on regular Envoys made after 2002. There are no tools required for this.
Reach up behind the corner light. You can just push in the tab on the socket, twist it counter clockwise, and it pulls out. Then you can pull your old bulb out and push your new bulb in. Then you would just twist that socket back into the corner light clockwise to lock it.
Now push the tab on the side of your corner light, and pull back and then down. Just to show you a close-up this is the tab. You just push that in and it pops out. Then you can pull it down and out.
Now feed that tab on the left up and in, and then you just push in the right side and it will clip into place. Once it's pushed forward and set back into place, just twist your socket back in clockwise to lock it. Then you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
