Replaces
Part Details
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the inside door handle on this Honda Accord. The only tools you'll need include a small flat blade screwdriver and a Phillip's screwdriver. This procedure is the same for all doors, and if you don't have power door locks you just won't have to unplug them.
Inside door handle: these break a lot on the inside. There's a Phillip's screw here. Normally there would be a little door that you'd probably pry with a screwdriver to expose the screw. Why don't you just remove that screw, and then you slide the handle forward and pull out. When you pull out, you can see there's a little clip on here. Pull that back with your thumb or screwdriver, pull that up and out, and then your powder door lock if you have them is hooked up right there. Little button, pull it off, and the handle is off.
You can see my handle is in fine shape. A lot of times they'll break in here. The reinstall is easy enough. You'd want to swap you power window switch over to your new one if you have power windows. It's just two Phillip's screw there. Connect that and pull your clip out of the way. Then slide it back. Put your screw back in, and if it had a little door, put in the door to hide the screw.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
