Replaces
Part Details
TRQ ignition coils will have your engine running like new. TRQ ignition coils are manufactured to precise specifications using premium raw materials to optimize each vehicle's ignition system. To ensure peak performance, TRQ recommends replacing ignition coils in sets to prevent electrical output imbalances. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks!
In this video, we're going to show you ignition coil replacement. This is a 2003 Honda Civic. It has a 1.7-liter, and this is similar procedure for Hondas and Acuras with the 1.7-liter as well as the 3.5-liter. Items you'll need include new ignition coils from 1AAuto.com, flat blade screwdriver, 10mm socket and ratchet, also a 10mm wrench will work.
Open the hood and pull the lever right here. Underneath there's a safety latch. Lift it up. Pick up and put the prop rod in place. Your ignition coils are located right on the top of the engine here: one, two, three, and four. Flat blade screwdriver to remove the cover. 10mm socket or a wrench would work as well to remove the nut that holds the coil in place. Take out the tab on the harness connection, press down and pull, disconnect, pull it up and out. We'll do the same thing for the other three.
Here you can see the old parts from the vehicle. New coils from 1A Auto, they're exactly the same, connector is the same, has the seal too. We're going to install and function just like the originals. To install, push them down in, you want to just put the connector on them. Down, push hard, 10mm nuts back on. Tighten. Don't want to go too tight. Get your cover and you're all set.
Thanks for tuning in. We hope this video helped you out. Next time you need parts for your car, please visit 1AAuto.com. Also check out our other helpful how-to and diagnosis videos.
Tools used
Tools used
