Replaces
Item Condition:
New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Tools used
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
Cabin filter is located behind the glove box. You just open it up. There's a little strut here. It keeps the glove box from dropping too far and too fast. You're going to push in and pop it off, just like that. Then you take the two sides of the glove box and just push them in gently. It will fold down.
You may want to take whatever is in your glove box out because it's going to fall right down. There's a panel right here with a couple arrows and some tabs. Cabin filter is located in here. Now push in these locks, and pull it straight out. This one is pretty dirty. It’s full of all the stuff it catches, so it doesn't go into your blower motor.
Here's our original cabin air filter with the tray from our vehicle. Here's the brand new replacement filter from 1AAuto.com. It's an exact match. It will fit perfectly. It's marked with the direction of flow just like the front of this is marked with the direction of flow. Simply lift this out of the tray, and throw it away.
This shows the direction of flow. I want to put it in the same direction with the pleats. There's little tabs here on the edges. Slide it in just like that. This will fit in our vehicle perfectly. Keep our blower motor from getting filled with outside debris.
Reinstall it. We'll slide the tray right back into the heater box. It clicks, and it locks into place.
Push the glove box back up. Then attach this little strut part. You may have to push the glove box up just a little more. Glove box might even lock into place. We'll push this forward.
This has the little strut, so when you open it, it doesn't slam down. Replace all your stuff in your glove box. The cabin filter is changed.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Tools used
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
Open the hood, go inside, the latch is way down here, by your left foot. Hood release for the safety is under here, lift it up. Hood has two positions: there's one here, and it also has a service position down here. Push the hood way open—this way you don't bump your head into the hood.
Air filter’s located in the air box here on the driver’s side. There's three metal clips holding it on, and it slides into two plastic tabs on this side towards the shock tower. Unclip all these, push them down, and unlock them. It'll lift up on the air box, and it'll slide out of these pins. Kind of pick it up and slide the air filter out. It's got some leaves stuck in it.
Take a new air filter, wider parts going to go towards the bottom. This sort of flat part goes towards the intake. Lift this up, slide it down into place, and sit right in the air box. Get the cover down and slide it past these harnesses. Make sure the filters seated in there. These tabs are going to go into here, like that, and push it down. Pull up on the locks. The air filters replaced. Put the prop right back in its spot. You're all set.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
