Replaces
Left Hand Drive:
All of our auto parts are intended for Left Hand Drive USDM vehicles. If your vehicle is Right Hand Drive, please ensure the part is correct for your specific vehicle.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet.
Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20+ years' experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly, that's going to save you time and money. Thank you and enjoy the video.
In this video we're going to replace the heater and AC blower motor on this '95 Accord, same as any '94 - '97 Accord. The only tool you'll need is a T25 Torx bit or an 8 mm or 5/16 socket with a ratchet driver.
Symptoms or signs of your fan motor going bad is you're hearing squealing or grinding or clicking noises when you turn your fan on and they change with the speed. Sometimes that will lead to just your fan not working or your fan gets weaker.
To remove the fan, here's your lead back in here. I'm just pressing this way with my thumb and pulling down. It came out easy because I've taken it apart before. The first time you do it, it'll probably be a little difficult, but you just press it and pull it down.
There's three screws, one over here, one here, and then one way up in here - that guy back there. Actually that one's the easiest to see right from about here. This is the foot well right under the door jamb area, and you can see it right through there. That's the best place to look at it when you're trying to undo it. These screws can be removed with a T25 Torx bit, which is what I'll use; a 8mm; or a 5/16 socket; and actually a flat blade screwdriver works as well. I'll take those fasteners out. You can see it come down. Pull it back towards the back of the car, and down and out.
To get the fan back in, you want this part right over here towards the console or towards the driver's side of the vehicle, and then push the cage in, pull your wire out. And a little bit of force. I'm pushing up and rotating the motor this way at the same time. And up, and start to screw, second screw, and your third screw. That's going have to do by feel a little bit. Once you have those other two in though, you just put it in the hole and it goes right up in. And using your tool of choice Again, for this screw I'm looking from over here. That's really my best angle to see it.
Just check them by hand and make sure they're as tight as I want them to be and not tighter. You don't want to strip the plastic. And plug in the lead.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free: 888-844-3393. We're the company that's here for you on the internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we show you how to replace the blower motor on this 1998 Honda Civic and it's the same part and process for these Civics from '92 to 2000. The items you'll need are a new blower motor from 1AAuto.com, a flat blade screwdriver or pair of pliers, and an8 mm socket and ratchet.
Underneath the glove box on your passenger side, you'll see this panel with two clips on it. I'm going to just pry those out either using a flat blade screwdriver or pair of pliers. Once those are removed, this panel just pulls right out. Now, up underneath your glove box, your blower motor is located right here. It's held in with these three 8mm bolts: there and the third one is right back here. We'll just fast forward as Don removes each of those. Once those are removed, the blower motor pulls right down, and you can just disconnect this harness and just push in the tab. Pull it out.
Now, the old blower motor is on the right; the new blower motor from 1AAuto is on the left. You can see they're identical, and they will mount up exactly the same. Feed your new blower motor up into place and replace those three 8mm bolts and just tighten them up. You can see he starts each one by hand and then just tightens them up with a socket and ratchet. Be careful not to over tighten as you are just going into plastic. Reconnect your harness, and replace that panel and those two clips, and then you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
