Part Details
-
Distance Between Mounting Holes:
66 mm
-
Grease Fitting Included:
No
-
Stud Tapered End 1 Diameter:
0.66 in
16.85 mm
-
Stud Thread Diameter:
14 mm
-
Mounting Bolts Included:
Yes
-
Mounting Hole Quantity:
1
-
Mounting Bolt Thread Pitch:
1.25 mm
-
Dust Boot Included:
Yes
-
Mount Plate Included:
No
-
Mounting Bolt Length:
32.1 mm
1.26 in
-
Dust Boot Material:
Choloroprene Rubber (CR)
-
Nuts Included:
Yes
-
Washers Included:
No
-
Ball Joint Assembly:
Yes
-
Mounting Bolt Head Diameter:
25 mm
0.98 in
-
Mounting Bolt Thread Length:
20 mm
0.79 in
-
Suspension Grade Type:
Standard
-
Castle Nut Included:
Yes
-
Stud Thread Length:
21 mm
0.83 in
-
Height:
0.83 in
-
Width:
91.9 mm
-
Cotter Pin Included:
Yes
-
Color:
Black
-
Stud Thread Pitch:
2 mm
-
Mounting Hardware Included:
Yes
-
Stud Type:
Threaded
-
Cotter Pin Hole:
Yes
-
Material:
Steel
-
Mounting Type:
Bolt-In
-
Stud Tapered End 2 Diameter:
0.79 in
20 mm
-
Adjustable:
No
-
Stud Taper Per Foot:
0.06 in
-
Greaseable:
No
-
Tapered Stud:
Yes
-
Bushings Included:
No
Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
