How to Replace Back up Reverse Light 1998-2005 Volkswagen Beetle
Created on: 2014-06-26
This video shows how to change the reverse light bulbs and remove and install the reverse light housings yourself on the 98-05 Volkswagen Beetle
-
step 1 :Servicing the Reverse Light Bulbs
- Remove the four T20 Torx bolts from the panel, if working on the passenger side
- Pull back the panel
- Disconnect the reverse light wiring harness using a flat blade screwdriver
- Twist the bulb socket counterclockwise out of the light
- Pull the bulb out of the socket
- Push the new bulb into the socket
- Twist the socket counterclockwise into the light, if you are servicing the bulbs alone
-
step 2 :Removing the Reverse Light
- Remove the two 8mm nuts from the reverse light
- Pull the reverse light out from the outside
-
step 3 :Installing the New Reverse Light
- Twist the bulb socket out of the reverse light, if you have not already done so
- Twist the bulb socket into the new reverse light
- Push the new reverse light into place
- Fasten the two 8mm nuts onto the reverse light
- Connect the reverse light wiring harness
- Lift the panel into place
- Insert the four T20 bolts into the panel
Tools needed
-
T20 Driver
Ratchet
Flat Blade Screwdriver
8mm Socket
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace and service a reverse light on this 2001 Volkswagen Beetle, and it's the same part and similar process on these Beetles from '98 to 2005, and we show you on the passenger side, but the driver side is the similar procedure. The items you'll need for this are a new reverse light from 1AAuto.com, an 8mm socket and ratchet, a flat blade screwdriver, and for the passenger side, you're going to need a T20 Torx bit or Torx driver.
On the driver side, you can access the light, right here. On the passenger side, there is this panel, that's held in with four T20 Torx bolts. Just go ahead and remove those. Slide back the panel and pull it down, and now you have access to the back of your reverse light. Stick a screwdriver into the slot on top of the harness and pry it back, and then pull the harness down.
To replace your bulb, just twist the socket counterclockwise, then pull the bulb out, twist your new bulb in, and twist the socket back in clockwise to lock it. To replace the entire assembly, you'll remove these two 8mm bolts, and the light will just push out.
On the left is the old light; on the right is the new one from 1A Auto. You can see they're identical and they'll fit exactly the same. Twist the socket out of your old assembly and then twist it into your new assembly and feed the assembly up into place. Just push it straight back until this does go through and then replace those two 8mm nuts. Just tighten those up. Reconnect your harness, and then, just feed the panel back up into place and slide it forward. Then, just replace those four T20 bolts, and you're all set. We hope this video helps you out.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Shop Products
How to Replace Tail Light 2001-05 Honda Civic
How to install, repair, fix, change or replace a broken, damaged, burned out, cracked, faded, cloudy or chipped tail light / brake light on 01, 02, 03, 04, 05 Honda Civic
