Replaces
Part Details
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace and service a reverse light on this 2001 Volkswagen Beetle, and it's the same part and similar process on these Beetles from '98 to 2005, and we show you on the passenger side, but the driver side is the similar procedure. The items you'll need for this are a new reverse light from 1AAuto.com, an 8mm socket and ratchet, a flat blade screwdriver, and for the passenger side, you're going to need a T20 Torx bit or Torx driver.
On the driver side, you can access the light, right here. On the passenger side, there is this panel, that's held in with four T20 Torx bolts. Just go ahead and remove those. Slide back the panel and pull it down, and now you have access to the back of your reverse light. Stick a screwdriver into the slot on top of the harness and pry it back, and then pull the harness down.
To replace your bulb, just twist the socket counterclockwise, then pull the bulb out, twist your new bulb in, and twist the socket back in clockwise to lock it. To replace the entire assembly, you'll remove these two 8mm bolts, and the light will just push out.
On the left is the old light; on the right is the new one from 1A Auto. You can see they're identical and they'll fit exactly the same. Twist the socket out of your old assembly and then twist it into your new assembly and feed the assembly up into place. Just push it straight back until this does go through and then replace those two 8mm nuts. Just tighten those up. Reconnect your harness, and then, just feed the panel back up into place and slide it forward. Then, just replace those four T20 bolts, and you're all set. We hope this video helps you out.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
