Replaces
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we show you how to replace the front lower engine mount on this 2005 Hyundai Elantra. You'll need a jack and jack stands, and then a 14mm socket, a 14mm wrench, and you'll probably need a ratchet that has a flexible handle that helps you get in one of the angles a little better, and you'll see what we mean. This is on a 2005 Elantra, same for any 2001 to 2006 Elantra with a 2.0 liter motor.
Locate your front lower motor mount at the front of the engine, right in front of the transmission, and right behind the subframe. So, I'm supporting the engine between where the engine and transmission mate together. I'm going to locate the four bolts that hold the motor mount in place, this being one, two, the third one over here on the back behind, and the fourth one right here. They're 14-mm. I'll place my socket wrench on this side. I'm going to hold the wrench on this side and remove the nut and bolt. I'm going to use an adjustable angled ratchet for the two that go in vertically to the subframe. This just makes it easier to get to from underneath. To get it out, I'm going to rotate the plate vertically, slide the whole mount up, turning it a little bit and bringing it down the side.
I'm putting the mount back in, and I start all bolts in before I tighten any of them down. Just fast forward here, as we tighten those up. It's a pretty straightforward repair. Locate the mount. Make sure you support the engine, and then remove all four bolts. Lift the mount up and out. Put it back in, and then tighten up all four bolts again.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace an upper engine mount on this 2005 Hyundai Elantra. It's actually the same as any 2001 to 2006 Elantra. The tools you'll need are jack and jack stands, 10mm, 14mm, and 17mm socket, ratchet and extensions, and a Phillips screwdriver.
To start off this repair, you're going to want to jack up the front of the vehicle and support it with jack stands. In this footage, you'll notice we have the wheel off. You do not need to remove your front tire. We had done that for different reasons. We've got the car supported with a lift, and you can do it with jack stands.
Then, we're going to have to support the engine because we're going to remove the motor mount. We're going to do that with a floor jack and a piece of wood in between the jack and the oil pan. Locate your three upper motor mount bolts and nuts. There are actually two nuts and a bolt. It's a 14mm to undo those. We'll just fast-forward here as we remove those three nuts.
I'm removing the Phillips head screw that holds the power steering reservoir and lift it up. Slide it out of the way. Then, locate this 10mm here that's on the bottom of the power steering reservoir. You've got one-two-three 14mm bolts. We'll kick it into high gear again here as we fast-forward through removing those three bolts.
Now, with the 17mm socket, I'm going to take the nut off the top of the motor mount. Now, I can pull the engine mount bracket off and slide the engine mount out of the way.
I'm putting the motor mount back in. Okay, we're going to speed it up here. So, as you saw, put the new motor mount back into place and then put the upper bracket on. You saw us just kind of lift up the engine a little bit with a jack. That just allowed everything to go together easier.
Then, we start all our bolts on, and then you can tighten up the upper bracket. Let the engine down into place, and then tighten up all the rest of the bolts.
All these bolts, the 15mm you want to tighten up to about 50 to 55 foot-pounds, and that 17mm nut to about 60 to 65 foot-pounds. Put the bolt back in to the power steering reservoir and then the retaining screw.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
EMT00400
This will be the front center mount located by the radiator. At this time we do not offer the passenger side mount, but to make your search easier you may use a DEA Products part number A7146.
