Genuine original equipment part (OEM) that was factory installed on your vehicle by the manufacturer.
Item Condition:New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
1 Year Warranty
This item is backed by our 1-year warranty. In the event this item should fail during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Lighter Socket Trim Part MPIDB00014 Dodge Ram 1998-2008 Buy Quality Auto Parts at 1A Auto
How to Replace Lighter Socket Outlet Bezels 1998-2015 Dodge Ram
Lighter Socket Trim Part MPIDB00014 Dodge Ram 1998-2008 Buy Quality Auto Parts at 1A Auto
Created on:
Tools used
No Tools Needed
Hi, I'm Tony with 1A Auto, here to talk to you today about your accessory power trim ring in the 2008 Dodge Ram behind me.
Here we have our old part from the vehicle. As you can see, it's all banged up and scratched up. We remove this as a part of the process to remove the accessory power outlet or the cigarette lighter. They're very easy to break and a little tough to come out.
We have our new part from 1A Auto. As you can see, the parts are a little bit different aesthetically. This part's got a nice rigid backing on it. It's going to help hold that in a little bit firmer. A little bit easier to take in and out without worrying about breaking it, snapping it.
If you have a broken or damaged trim ring for your accessory power outlets, this new part from 1A is going to fix you up right.
Tools used
Flat Blade Screwdriver
Painter's Tape
Pick
1. Removing the Center Dash Trim
Apply painters tape to a flat blade screwdriver
Carefully move along the seems and pop the dash trim out
Disconnect the accessory wiring harness
Remove the heated seat wiring harness
Disconnect the power sliding window switch
Disconnect the climate control panel
Disconnect the traction control wiring harness
Disconnect the cigarette wire wiring harness
2. Removing the Lighter Socket
Pop off the cover
Push the light out through the front
Twist the bezel so it matches the notch and push the trim out
Pell off the socket cover from the trim
3. Installing the Lighter Socket
Slide the cover onto the trim piece
Line up the trim panel with the notch on the piece
Press the socket trim into place
Align the tabs on the socket with the notches on the trim
Press the socket into place
4. Installing the Center Dash Trim
Connect the accessory wiring harness
Connect the heated seat wiring harness
Connect the power sliding window switch
Connect the climate control panel
Connect the traction control wiring harness
Connect the cigarette wire wiring harness
Press the center dash trim into place
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the power outlets and cigarette lighters as well as the bezels. This is a 2008 Dodge Ram, but this process is similar for many different vehicles. Items you'll need include new outlets and lighters and bezels from 1AAuto.com, and a flat blade screwdriver with some painter's tape or a plastic prying tool.
To remove your center dash trim, we're going to use a flat blade screwdriver with some painter's tape on it or a non-marring plastic ply tool if you have one. Feel around the edges. Pry out until you get a tab to pop. Carefully move along and pop out the rest of the tabs until you can pull out the whole panel. Move it around your shifter column and lay it out flat. Remove our accessory power, and the passenger heated seats switch.
Push down on the tab to release the power sliding windows switch, the two connectors for the climate control panel, your traction control, driver's heated seat, cigarette lighter, and your four-wheel drive selector.
To remove your power outlet, pop off the cover. Push out on the socket. From there, you need to replace the trim ring as well. You'll see there's a little notch here and a tab on the bezel. Rotate the bezel until it lines up with that notch. Push it out.
The new bezel doesn't come with a socket cover. Peel it off the old trim.
Here, we have our new trim bezel from 1A Auto, universally cut to fit either the power outlet or the cigarette lighter socket. This notch is for our cover, so we'll slide our power outlet cover on and align the arm into that notch.
From there, we'll line up one of the mounting tabs with the notch in the trim panel. Pop it into place and rotate it so our power outlet socket sits upright. Now that we know our power outlet cap is in the right place, we'll align the tabs in our new power outlet socket from 1AAuto.com into the notches in the trim panel.
Push it until it snaps. Pop our cover back on.
Our cigarette lighter socket comes out the same way our power outlet socket did, by pushing on it from the back and sliding it out of the trim panel. You can also replace this trim bezel the same way we did on the other side.
This one's all right, so we'll just install our new socket from 1A Auto. Line up the notches in the socket and push it back into place until it snaps. Reconnect all your connectors.
Each connector is different, so you shouldn't have a problem with crossing them over or connecting them in the wrong spot. Slide your dash behind the gear selector. Line it up. Snap it back into place.
Thanks for tuning in. We hope this video helped you out. Next time you need parts for your car, please visit 1AAuto.com. Also check out our other helpful how-to and diagnosis videos.
Tools used
No Tools Needed
Hi, I'm Tony with 1A Auto, here to talk to you today about your accessory power trim ring in the 2008 Dodge Ram behind me.
Here we have our old part from the vehicle. As you can see, it's all banged up and scratched up. We remove this as a part of the process to remove the accessory power outlet or the cigarette lighter. They're very easy to break and a little tough to come out.
We have our new part from 1A Auto. As you can see, the parts are a little bit different aesthetically. This part's got a nice rigid backing on it. It's going to help hold that in a little bit firmer. A little bit easier to take in and out without worrying about breaking it, snapping it.
If you have a broken or damaged trim ring for your accessory power outlets, this new part from 1A is going to fix you up right.
04793555AB
In Stock
Product Reviews
Loading reviews
4.50/ 5.02
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
1
0
0
0
Worked as supposed to
Robert
December 14, 2022
Needed ithis part to replace old one ,perfect fit
It fits!
David
June 7, 2023
When I searched this part I had the belief this was for a 1999 dodge ram. When it arrived the packaging showed it was for models beginning 2001. Though the part looks just slightly different than my original, it works perfectly fine for the 1999 model.
Customer Q&A
Did your old one Crack or have stress issues?April 26, 2023
De B
10
That can be a reason for replacement!
April 26, 2023
Andra M
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.