Replaces
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
In this video, we will be replacing a taillight on a 1998 Jeep Grand Cherokee . the same process for basically all 93 to 98 Cherokees. It only takes a 10 millimeter wrench or socket. You can see here, there's three bolts. I'm just going to kind of loosen them up with a socket and ratchet handle. Then I will speed the video up as I take the rest of the bolts out the rest of the way. Do not try to work this fast at home. I have hands of lightning.
Okay, and then once that's done then you just pull it. There is a little pin that is in there so you have to pull briskly. Then, all of the plates, you can service them, they just twist out. Then there is another small light at the bottom, or maybe the side: the side marker. Once those are all out then you can swap your light if you have a damaged tail light, or service the bulbs, whatever you need to do. Then they twist back in to replace. You just got to make sure you line up the right pins with the right slots. The old square peg, round hole, or I don't know, round, slotted peg, round slotted hole. Twist them all in. Then line that pin up and push it right in.
Then, we will speed up putting the bolts back in but that's about it. Three 10 millimeter bolts and you can replace your damaged taillight or service the bulbs, whatever you might need to do.
And then after we get them all tightened up, you always want to make sure to do a quick test and make sure all your lights are working. So we'll hop in. Check the: lights, brake light, blinker.
Thanks for watching. This video was brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. We hope this helps you out. Feel free to call us toll-free, 888-844-3393. Thank you.
