Replaces
Replaces Jeep Liberty Catalytic Converter Davico Mfg 1AEEK01410
$647.54
Replaces Jeep Dodge Ram Chrysler Valve Body Solenoid Mopar 68353383AB
$465.04
Replaces Jeep Liberty Front & Rear 12 Piece Steering & Suspension Kit TRQ PSA32047
$375.95
Replaces Jeep Dodge Alternator ACDelco 335-1287
$358.95
Replaces 2005-07 Jeep Liberty Front 10 Piece Steering & Suspension Kit TRQ PSA60022
$350.95
Replaces 2002-07 Jeep Liberty Front Ceramic Performance Brake Pad & Rotor Kit with Calipers & Hoses TRQ Performance BKA34020
$309.95
Replaces 2005-07 Jeep Liberty Front 6 Piece Control Arm with Ball Joint Set TRQ PSA56377
$309.95
Replaces 2002-07 Jeep Liberty Front Semi-Metallic Performance Brake Pad & Rotor Kit with Calipers & Hoses TRQ Performance BKA34019
$306.95
Replaces Jeep Liberty Front Right Catalytic Converter Davico Mfg 193722
$294.81
Replaces 2002-07 Jeep Liberty Front Ceramic Brake Pad & Rotor Kit with Calipers & Hoses TRQ BKA29800
$293.95
Genuine original equipment part (OEM) that was factory installed on your vehicle by the manufacturer.
Returns: Parts with electrical components cannot be returned once installed.
Left Hand Drive:
All of our auto parts are intended for Left Hand Drive USDM vehicles. If your vehicle is Right Hand Drive, please ensure the part is correct for your specific vehicle.
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
1 Year Warranty
This item is backed by our 1-year warranty. In the event this item should fail during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the blower motor resistor on this 2006 Jeep Liberty. The only items that you're going to need include a 90-degree pick, an 8mm socket, and a ratchet.
Start off by opening your glove box. Push in on the sides, and then pull the glove box down. Your blower motor resistor is located right here. Using a 90-degree pick, pry the red clip underneath the harness out, push the tab on the harness, and pull it free. Next, remove these two 8mm bolts. We'll just fast-forward as Don does this. Now, the blower motor resistor will pull out.
Push your new blower motor resister into place and replace those two 8mm bolts. Then just tighten them up with the ratchet. Reconnect your harness, and then push that red clip in to lock it. Then push your glove box back up into place.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
