1AACS00237-Mazda 3 Front Driver & Passenger Side 2 Piece CV Axle Assembly Set TRQ CSA72949
false

Replaces

9

2005 Mazda 3 L4 2.0L Automatic Transmission with Bolt On Outer Joint Axle Front Driver & Passenger Side 2 Piece CV Axle Assembly Set TRQ CSA72949

05 (frm 1/6/05)-09 Mazda 3 ((w/2.0L exc Trbo, w/AT) Front CV Axle Shaft (Retained by Nut) Pair

Out of Stock

$ 155.95
Close



TRQ
Product Reviews
Loading reviews
4.78/ 5.0 9
Keeping the car on the road
Bryan
April 30, 2019
The boots on the old CV joints had started to fail and let the greats out. These parts arrived quickly and fit perfectly. Thank you for the cost effective part and fast shipping
Smooth rollin now.
Bernardo
December 7, 2019
I drove around with a driver side broken axle. So I ordered the pair of axles for my 2008 mazda 3 i sedan and now its smooth rollin. Thank u
Front end axle
B
October 31, 2020
Perfect fit.1a auto has the right parts for your vehicle. The service is excellent. I recommend them
Cv axles
Marcus
April 15, 2021
I ordered cv axles for both sides, and was pleased with how quickly they were delivered. Also, 1A also has great instructional videos to help with any job that I've had to do on my car.
CV shafts
Gabriel
May 2, 2021
Fits exactly like the said. Great product.
Good product
edward
August 29, 2021
Fit good fast shipping thank you good quality
Not sure about longevity
daniel
September 5, 2023
Parts looked good. Parts fit correctly into transmission. However the right side axle doesn't turn smoothly. I will need to confirm it is the axle and not anything else. Both original axles were frozen into hub, so the job took longer than usual.
Justin
September 26, 2023
Parts fit good, working condition no issues
Jose
November 29, 2023
Great
Customer Q&A
Are the driveshaft clips included or purchased separately?
November 2, 2019
Aaron K
10
Included
November 2, 2019
Corry M
10
Hello, The driveshaft clips will not be included and would need to be purchased separately. Please let us know if you have any further questions.
November 3, 2019
Emma F
10
Clips are included with the drive shaft
November 6, 2019
Bryan G
10
I posted this question and this is what I discovered upon receipt of my purchase: these clips are called circlips and I did receive a circlip on the drive axle for the driver's side which is a male end and is inserted into the transaxle. The passenger side drive axle is a female end and is inserted on to the intermediary shaft which then goes into the transaxle. Upon removal of the outgoing drive axle I found that there is a circlip on the male end piece - the intermediary shaft - which comes out of the transaxle and locks into the passenger side drive axle once it is installed. There was not a new circlip sent for the passenger side. According to both the Mazda technical book for the 2008 Mazda3i 2.0L and the Haynes Manual, the old clips need to be removed & replaced. Once I locate a new circlip, I will be able to install this new drive axle and be on my way for a fresh alignment. I hope this helps!
November 12, 2019
Aaron K
do these have spindle/axle nuts 32mm or bolts 13mm, and what is the compressed length of each?
September 13, 2020
Joe S
10
Thank you for your inquiry. Actual Measurements are not listed or available. Our parts are exact replacements for your vehicle's OEM parts. As long as your year, make, and model match up with our listing, these parts will directly fit and function like the originals. Please let us know if you have any other questions. Thank you!.
September 14, 2020
Emma F
Are these compatible with a 2008 Mazda 3 2.3L L3X model? Thanks.
May 9, 2022
Jacob M
10
This part will not fit your vehicle, but we may have a part that is listed to fit. Please enter your vehicle's year make and model in the search bar at the top of the page. This will display parts guaranteed to fit your vehicle. Just be sure to verify all of the information shown in the Vehicle Fit tab before ordering.
May 9, 2022
Cristina P
Hello would those for mazada 3 2004 ?? I dont see one for mazda 3 2004 , thank you
June 9, 2022
Jose A
10
Currently, we do not carry this part for your vehicle. We're always updating our inventory so please check back soon!
June 9, 2022
Cristina P
Will this fit an 08 Mazdaspeed 3?
July 14, 2022
John D
10
These CV axles are listed to fit all 2008 Mazda 3 models that are equipped with a L4 2.0L engine and an Automatic Transmission.
July 14, 2022
Jessica D
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Mazda is a registered trademark of Mazda Motor Corporation. 1A Auto is not affiliated with or sponsored by Mazda or Mazda Motor Corporation. See all trademarks.
Enter Vehicle Year Make Model

Specify your vehicle's year, make and model to guarantee fit.

This part doesn’t fit a . Select from parts that fit.

Show parts that fit

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a 2005 Mazda 3 with these options.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a 2005 Mazda 3 with these options.