Kit Includes: (1) Front Ceramic Brake Pad Set with Contact Point Grease & Hardware (2) Front Brake Rotors (2) Rear Brake Rotors (1) Rear Ceramic Brake Pad Set with Contact Point Grease & Hardware
Specification
Trim
S
Location
Front & Rear
TRQ brake kits are designed to restore your brake system to like-new performance. TRQ brake pads are positive molded, thermal scorched, chamfered, and utilize a multi-layer shim for enhanced performance and service life. TRQ rotors have a non-directional finish that reduces the break-in period for new rotors as well as reducing vibrations throughout the rotor’s lifecycle. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Positive Molded - Less dust resulting in clean wheels
G3000 Casting Alloy - Reduced noise and improved wear resistance
Application Specific Design - Extended service life, no modifications
Premium Positive Molded Brake Pads Features and Benefits
Same manufacturing process the original equipment manufacturers use
High density friction material for long pad life
Less resin content virtually eliminates brake fade and glazing
Reduced dusting for both Ceramic and Semi-metallic materials
Quality multi-layered shims & pad chamfering provide smooth & quite braking
Front Brake Rotor Venting TypeVentedWheel Lug Count5 LugFront Brake Rotor Diameter11.65 in. (296mm)
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
How to Replace Rear Brakes 2002-18 Nissan Altima
How to Replace Front Brakes 2002-06 Nissan Altima
Created on:
Tools used
12mm Socket
A Piece of Pipe (for leverage)
Torque Wrench
14mm Socket
Jack Stands
19mm Socket
Brake Parts Cleaner
21mm Socket
8mm Socket
Anti-Seize Grease
Ratchet
Floor Jack
1/2 Inch Breaker Bar
1. Remove the wheel
Loosen your lug nuts with a 19 mm socket and breaker bar
Raise and secure the vehicle.
Remove the lug nuts the rest of the way and set the wheel aside.
2. Inspect and remove the brakes
Observe the thickness of your brake pads.
Inspect your rotors for excessive wear or deep gouges.
Loosen the caliper bolt with a 14 mm socket and ratchet.
Use a flat blade screwdriver to compress the caliper pistons some and remove the caliper.
Unbolt the 19 mm caliper bracket bolts.
Remove the rotor and pop the plug out of the rotor.
3. Install the new disc brakes
Hit the emergency brake with brake cleaner.
Clean your new rotor with brake cleaner (mineral spirits would work just as well)
Install the brake rotor onto the vehicle and replace the little access plug.
Mount the caliper bracket and torque the 19 mm bolts to 85-90 ft lbs
Use a C-clamp to compress the caliper.
Install the brake pads, dabbing a bit of anti-seize grease on the edges to get it in.
Push the caliper into place and bolt it down with your 14 mm socket.
Torque the 14 mm bolt to 25 ft lbs.
4. Mount the wheel
Put the wheel on the vehicle.
Hand-tighten the lug nuts.
Lower the vehicle.
Torque your lug nuts in a star pattern to 100 ft lbs.
Brought to you by 1AAuto.com. Your source for quality replacement parts and the best service on the internet. Hi, I'm Don from 1A Auto. I hope this how to video help you out. The next time you need a part for your vehicle think of 1AAuto.com. Thanks. In this video we show you how to replace the rear brakes on this 2003 Nissan Altima, pretty much the same for any 2002 to 2006. We show you the right hand, the left hand is the same procedure. We do always recommend you replace your brakes in pairs.
The items you'll need for this repair are new brakes pads and rotor kit from 1A Auto.com; 8, 12, 14, 19 and 21 mm sockets with a ratchet. A piece of pipe for some extra leverage. Brake cleaner, brake grease, brake fluid, jack and jack stands and a torque wrench. Raise and remove your wheel and tire. If you don't have the benefit of air tools, loosen the lug nuts with the vehicle on the ground, then raise and support it and remove the lug nuts the rest of the way. Inspect your brakes. You can look through and see the brake pads, and there's not much left to the brake pads on this vehicle and the rotor is in rough shape, pretty corroded with some large gouges. To just replace the pads you can see we took that top bolt out, but we're going to take the whole rotor off because it's actually frozen on this car.
Its two 19 mm bolts and you can see we use a 19 mm socket with a ratchet and a pipe for some extra leverage. You'll need to do this if you want to replace the rotor anyways, because you need to take the whole caliper bracket off in order to get the rotor off. Once the bolts are removed, using a flat blade screwdriver pry that off. Then you can set that aside. Your old rotor pulls right off. You want to use a flat blade screwdriver and pop this plug out of the rotor. Spray down your emergency brake assembly with some brake cleaner. Now using brake cleaner wipe down your new rotor. Then you put some brake grease on either end of your brake pads. You can see here's your adjuster for your other brake and that hole in the rotor is so you can reach the adjuster with a screwdriver. Turn it until you feel the parking brake drag on the inside a little bit; once adjusted then you can replace the plug. As we said before, our caliper was in bad shape. We ended up having to replace it, but you can ad lib along with us. You can put your caliper back in place.
Take the pads out of your caliper, and then put the caliper back in place. Put the two 19 mm bolts in place and then tighten them up to 85 - 90 foot pounds. Now you want to remove this 14 mm bolt right here. Once the bolt's removed pull your caliper back and then push, your brake pad slides into place. Once the sides are in place you can put your brake pads back in and push your caliper back into place and replace that 14mm bolt. Fast forward as we tighten that bolt back up to 25 foot pounds. - to your brake lines. Now we're going to fast forward here as Don replaces the wheel. You want to put the lug nuts on preliminarily. Lower the vehicle and tighten them the rest of the way. Now torque the lug nuts to a 100 foot pounds in a crossing pattern. After doing any repair on the brakes, before taking it out onto the road it's important to do a couple of things first. First you want to pump the brakes until the brake pedal firms up. Then you want to do a stop test from five miles per hour and then 10 miles per hour.
We hope this video helps you out; brought to you by 1AAuto.com. Your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for you on the internet and in person.
Tools used
21mm Socket
Flat Blade Screwdriver
14mm Socket
Jack Stands
Anti-Seize Grease
Lug Wrench
Ratchet
Floor Jack
Brake Parts Cleaner
1/2 Inch Breaker Bar
22mm Socket
1. Remove the wheel
Loosen the lug nuts with your lug wrench.
Raise and secure the vehicle.
Remove the lug nuts and set the wheel aside.
2. Remove the old brakes.
Check the thickness of your brake pads, and observe your rotors for deep gouges or excessive wear.
Loosen the caliper bolts with your 14 mm socket and ratchet.
Pry out the brake pads and brake pad brackets.
Use your 22 mm socket and breaker bar to unbolt the caliper bracket.
Remove the old brake rotor.
3. Install the new brakes
Clean the brake rotor with brake parts cleaner.
Use a wire brush to clean up the brake caliper bracket and the brake pad brackets.
Install the new brake rotor, and secure it in place while you install the calipers with a lug nut.
Put the caliper and brake pad brackets onto the rotor.
Bolt the caliper bracket down with your 22 mm wrench and torque the bolts to 100 ft lbs.
Apply anti-seize grease to the edges of your brake pads where they contact the brake pad brackets.
Use a large c-clamp to compress the caliper and mount it onto the caliper bracket.
Tighten the 14 mm bolts to 25 ft lbs.
Remove the lug nut you used to hold the rotor steady.
4. Put the wheel back on
Mount the wheel and hand tighten the lug nuts
Lower the vehicle and use a star pattern to torque the lug nuts to 100 ft lbs.
Pump your brakes and do a couple test stops in the driveway before test driving.
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet. Hi, I'm Don from 1A Auto, I hope this how to video helps you out and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the front brakes on this 2003 Nissan Altima, it's the same process on the Altima's from 2002 to 2006. We show on the passenger side but it's the same process on the driver's side. The items you'll need for this is new brake pad and router kit from 1AAuto.com, flat blade screwdriver, 14 mm, 21 mm and 22 mm sockets and ratchet, a wire brush, a large C clamp, brake cleaner, brake grease and jack and jack stands. Start off by removing your wheel, if you don't have air power tools you are going to want loosen the lug nuts while the vehicle is on the ground and then jack it up and remove them the rest of the way. Now to inspect your brakes, you just want to look in here and you can see how much life is left on your brake pads. Ours is in pretty rough shape. Then the next thing you want to do is just check your router for any deep gouges.
You want to pry in here with a screwdriver to push the caliper piston into place, this will make it easier to remove the caliper and then you want to remove this two 14mm bolts. Then you can pull that caliper off and you want to set aside and secure it with a wire tie or something up and out of the way and then pry off the brake pads. Pry off your brake pad slides. Next you want to remove these two 22 mm bolts, you can see Don uses a piece a pipe to give him some extra leverage to help break those bolts free. Once those bolts are removed, your caliper bracket will come right off and then using a hammer you want to hit the back of your router to break it free and pull that off as well. On the right is the old router and brake pads, on the left is the new ones from 1A Auto. Using some brake cleaner, clean up your new router. Use a wire brush to just clean up your caliper bracket a little bit. Also clean up your brake pad slides. Take some brake grease and just apply it to the ends of the brake pad on these tabs. Then take your caliper bracket and make sure that these slide bolts have grease on them. If they don't, apply some. Both of ours are all set.
Now put your new router into place and put on one lug nut just to hold into place. Then take your caliper bracket and put that into place and replace those two 22 mm bolts. Then just torque these bolts to 100 foot pounds. Push your brake pad slides back into place. Push your brake pads into place and if you need to you can use a hammer, just carefully tap into place. Then bring your caliper down and using a large C clamp, you just want to twist that piston in until it's flat. In the end it should look like this. Now you can put the caliper into place and you want to put it over those slide bolts and then replace those two 14 mm bolts and torque them to about 25 foot pounds. Replace your wheel, hub caps and lug nuts. Tighten the lug nuts preliminarily, lower the vehicle and tighten them the rest of the way. Then you want to torque the lug nuts in a crossing pattern to 100 foot pounds. After doing any repair on the brakes, before taking it out onto the road it's important to do a couple of things first. First you want to just pump the brakes until the brake firms up and then you want to do a stop test from 5 miles per hour and then 10 miles per hour.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free 888-844-3393. We're the company that's here for you on the Internet.
BKA11157
In Stock
Product Reviews
Loading reviews
4.89/ 5.018
18 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
16
2
0
0
0
Fast delivery
A
October 9, 2017
I received my brake kit a day before the estimated delivery date. I. really needed my brakes fixed fast and you guys made it happen. Thank you so much for your speedy service.
Decent brakes
Nathan
August 21, 2018
Didnt last as long as I expected, but I also started driving in more traffic recently so probably got the expected life from them
Great value great quality
Juan
October 22, 2018
I was amazed with the quality of this parts, I had bought a kit like this and it lasted a long time so I bought another kit and Im pleased with the brand and the fast shipping but mostly the prize :)
Robert
October 24, 2018
As always 1a auto performed in first class manner. I've ordered several parts for different cars on several occations and each time I've received the correct part in a timely manner with terrific customer service. Thanks 1a auto for the helpful "how to" videos also. Bob Santa Clarita CA
Amazing
Ramon
December 1, 2018
All the parts fit perfectly shipped fast and instructions made installation go smoothly
Perfect Fit! QUALITY PARTS Quick Service
Joseph
February 7, 2019
I am a multiple repeat customer of 1A Auto. This order was for a Nissan Altima, but I've ordered parts for 8 different vehicles in 2018. Never an issue, never a problem. I do suggest you either call or use the CHAT feature, there people know their stuff and make certain no mistakes are made such as ALL Wheel drive vs. Front Wheel drive, they know what vehicles to ask about.
Stop really
David
February 26, 2019
Just perfect!! Better than oem and a perfect fit. Shipping was faster than expected. Way to go!!!
Adam
April 25, 2019
I bought this brake kit for my wifs car and they work great. No stopping problems at all and they fell just as good if not better than brakes from the dealership. I would definitely recomend this brake kit.
Great set
Julio
January 22, 2020
Great set and easy to install.
Nissan / Chevy parts
jovon
July 30, 2020
I have been a customer of 1A Auto for the last two years. Nobody can beat their prices and quality of the parts Ive ordered. I will never us Local auto parts stores again.
Keep up the good work
Joe
Front and rear rotor kit
G
October 15, 2020
Good quality rotors and brakes! Would recommend
Ordering the drilled and slotted next
Awesome
Simplecio
April 22, 2021
Good prices and fast shipping totally satisfied will be ordering more from 1aauto
Great value
Clemente
May 22, 2021
Perfect fit replacement for OEM rotors & pads at a great value.
No complaints!
Maleika
April 7, 2022
Shipped fast! Reliable parts!!
Excellent
Jesse
November 11, 2022
Everything was correct and worked great!
Stephen
February 6, 2024
Good affordable replacement parts
Rear pad clips do not fit
Arnold
February 18, 2024
The rear set of clips do not fit perfectly. You'll have to bend one side to be able to make it fit. I ended up reusing the old ones on the side where the wear limit indicator is.
Mike
March 7, 2024
Work great and fit just like OEM work great..
Customer Q&A
Do roters and brakes from 2000 nissan altima fit a 2005 nissan altima?December 1, 2016
Yolanda P
10
no
December 3, 2016
Brian F
10
No
August 28, 2017
H I
10
No its different
August 21, 2018
Juan G
10
No
October 22, 2018
Juan G
Will this fit 2006 altima 2.5 special edition?March 7, 2017
Jennifer P
10
These will fit 2006 Nissan Altimas with the 2.5L engine as long as your vehicle is not a SE-R edition.
March 7, 2017
Alex P
Does this come with the break hardware kit ?September 19, 2017
Johnique E
10
This will include the brake pads and rotors. The anti rattle clips which the brake pads sit on are not included, but may be purchased separately.
September 19, 2017
Alex P
do 2005 nissan altima the same as 2001 meaning brake parts.?June 9, 2022
John D
10
2005 and 2001 Nissan Altimas will have different parts.
June 9, 2022
Emma F
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Nissan is a registered trademark of Nissan Motor Co., Ltd. 1A Auto is not affiliated with or sponsored by Nissan or Nissan Motor Co., Ltd.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.