Replaces
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace a fog light on this 2009 Nissan Titan, and we show you on the driver's side but the passenger's side is the same procedure. The items you'll need for this are new fog lights from 1AAuto.com, an 8mm socket and ratchet and a flat blade screwdriver.
Back behind your fog light you'll see this 8mm nut right here. Disconnect this harness, so you have better access to it, by pulling down on the tab and pulling the harness free. Then just remove that 8 mm nut. We'll fast forward as Don does that. Now use a flat blade screwdriver to push these pegs through. Then the fog light will pull out. To service the bulb, just twist it counter clockwise to remove it and twist in your new one clockwise to lock.
On the left is the new fog light from 1A Auto. On the right is the old one. You can see they're identical and they're going to fit exactly the same. Line up your fog light and push it back into place. Now just replace that 8mm nut and tighten it up. Push your harness back into place and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
