Replaces
Our direct fit gas-charged shock absorbers help restore your vehicle's handling and ride quality to just like new.
Install Tip: To keep your vehicle operating safely and as designed:
Improved ride comfort and longer life
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by our 100% satisfaction guarantee. Visit us at 1AAuto.com, your trusted source for quality auto parts.
In this video we're going to be working with our 2009 Nissan Rogue all-wheel drive. We're going to show you how to remove and replace your vehicle's rear shock. We're doing this on the passenger side but the procedure is the same on the driver's and we do recommend you replace them as a pair. If you like this video please click subscribe. We have a ton more information on this and many other vehicles. If you need these parts for your car, you can follow the link down in the description over to 1AAuto.com. Here are the items you'll need for this repair.
Loosen your lug nuts with a 21 millimeter socket and a breaker bar. You want to loosen them all about one turn. Raise and support your vehicle. We're using a lift to make it easier to show you what's going on but this job can easily be done at home with a jack and jack stands. Now, normally you can remove lug nuts by hand but these are recessed pretty far into the wheel, so I'm just going to use the 21 millimeter socket and my hand to remove the rest of our lug nuts. Remove your wheel and tire.
Using an 18 millimeter wrench and a socket and ratchet, remove the 18 millimeter nut and bolt at the bottom of the shock. With the vehicle jacked up, the shock does partially limit the travel of the suspension so you'll need to use a floor jack or screw jack to take some of the weight off in order to remove that bolt more easily. Using an 18 millimeter socket, ratchet, and the appropriate extension, remove the bolt on the top of the shock. You can access this over the back of the rear sub-frame. Once the bolt is out you can remove the shock from the vehicle.
Install the new shock. It's usually easiest to do the upper bolt first. Before you tighten that down you'll want to get the lower one into place as well. With that weight still on the vehicle, we'll tighten down all of our 18 millimeter hardware. Once everything's tight you can lower your jack or screw jack.
We'll reinstall the wheel and tire. I'll get one nut started on there. We'll get the rest on as best we can and then tighten them down by hand with our 21 millimeter socket. We'll then torque our lug nuts to 80 foot-pounds in a cross pattern.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
