Replaces
Part Details
Specifications
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Product Features
TRQ oxygen sensors are manufactured to precise specifications using premium raw materials to optimize your vehicle’s emission system. Each sensor is isostatically-pressed for improved strength and durability, and plasma-sprayed to improve sensitivity and prolong the service life of the sensors. Oxygen sensors wear out over time and should be replaced every 60,000 miles to prevent poor engine performance. TRQ recommends replacing the oxygen sensors in sets to optimize fuel economy and reduce overall emissions. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
What is Upstream vs. Downstream?
Install Tip: You may be required to reset the vehicle computer after installation of this part.
Returns: Parts with electrical components cannot be returned once installed.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the rear or downstream oxygen sensor on this 2006 Chevy Impala. You'll either need a 7/8 inch oxygen sensor socket with a ratchet or breaker bar, or a 7/8 inch wrench. You'll also need a pair of pliers, jack and jack stands, and a new oxygen sensor from 1AAuto.com.
The downstream or rear oxygen sensor and harness, there, are located downstream of the catalytic converter. You can use a 7/8 inch wrench or that special O2 sensor socket that you see here. I'm using a pipe to get extra leverage. I try and break it free first with this, and if that doesn't work then I'm going to go ahead with the wrench. You can see here that I'm applying some pressure and it's just too tight. Maybe there's a little bit of corrosion between the O2 sensor and the exhaust. Before I damage the nut there, I'm going to go ahead and switch over to a traditional wrench. Now that I've broken it free, I'll go ahead and fast forward as I finish unscrewing that. Underneath the protective flashing there you'll find the connector. You'll need to first remove the little white tab that goes through the connector, so that you can then unclip it. It can be kind of tricky. You might need some needle-nose pliers to press that in. Then give it a good tug, but once you get that white little tab out, you'll be able to disconnect the connector. It won't hurt if you pull it down a little bit more, to get a little bit more room. Then lift up on the tab and disconnect the O2 sensor.
Going back in, make sure that you thread in and tighten up the oxygen sensor before you plug it in or you'll get your harness all twisted up. I'm going to use my 7/8 inch wrench again to go ahead and do that. Once I've done that I will clip in the connector there to the harness and put my little white tab back through that connector so it doesn't come loose, and then, press the protective flashing back up against the bottom of the chassis.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by our 100% satisfaction guarantee. Visit us at 1AAuto.com, your trusted source for quality auto parts.
In this video I have a couple of oxygen sensors with me. While there are some aesthetic differences here, the wire lengths are a little different, the actual body and tip of the sensor are a little different, the threads and gasket are the same, and on the other end the connections are actually the same. I can plug these into either position on our vehicle. But if I had to ask you which one's upstream and which one's downstream, you probably can't tell just from looking at them. That's true of most oxygen sensors. The way you determine whether or not an O2 sensor is upstream or downstream is all done visually.
Your oxygen sensor position can be determined relative to your catalytic convertor. As the name suggests, upstream sensors will be located upstream or ahead of, in front of, above, closer to the engine than your catalytic convertors. This means that they see the exhaust gasses first. They then go through the catalytic convertor and to the downstream oxygen sensor, which will either be located in the catalytic convertor like our vehicle here, or after the catalytic convertor to monitor the gasses coming out of the cat and make sure that it's being efficient relative to the readings of the upstream O2 sensor.
The other determination you need to make is bank one versus bank two. Determining which bank is which can be done by looking at a picture of your vehicle's firing order. Whichever bank contains cylinder one is going to be bank one, and the other one, regardless of whether or not cylinder two is in it, is going to be bank two by default. These banks are true of V engines like V8s, V6s, and flat engines like Porsches and Subarus that have individual banks.
On inline four-cylinder engines, as long as they have one exhaust manifold like a Jeep four-liter or a four-cylinder Honda engine, you'll only have one bank with an upstream and downstream O2 sensor. There will be no bank two on the engine.
On our vehicle here, this is the passenger side, which we've already determined from the firing order is bank one. We have our upstream sensor here closest to the engine ahead of the cat. Then we have our downstream or sensor two here inside of the catalytic convertor. This could also be located somewhere after the cat. Here I have my two sensors for the vehicle. While they are aesthetically different, we can now tell this is my upstream sensor because it looks just like the upstream sensor I have up there. This is my downstream sensor. Now that we know which one's which, we can order the right part, correct the problem, and fix you up right.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
OSA61291
The part was an exact fit and the video gave me all the info I needed. Quick job, took longer to jack the car up than to change the part. I have always been impressed with the quality of 1A Auto parts and their prices make Autozone and Oreilly look like con-artists. Keep up the good work.
Very good parts and Good quality
Very good
Part did not work at all.
I've been impressed all the parts I have purchased from you guys I will continue buying my parts from you thanks for all your help
I have been ordering from 1a auto at 5 years now. And, I am still impressed with their customer service to the knowledge of different parts to the speedy delivery of whatever I have ordered. I highly recommend 1a auto as the first choice. Plus, they have installment videos to guide you along the way.
It looked as it was described
Good service in a timely Matter
Perfect fit and half the price of the local guys. The video was a great help.
Yes, the oxygen sensor will be heated.
DIY solutions brand parts are manufactured by various aftermarket companies specifically for us and built to your vehicle's exact OEM specifications. They carry a lifetime warranty.
