Replaces
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Acrylonitrile, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the steering wheel mounted trip and fuel switch on this 2003 GMC Envoy XL. The items that you'll need for this include a new trip and fuel mileage switch from 1AAuto.com, a flat blade screwdriver, and a pair of pliers.
Using a flat blade screwdriver, just carefully pry the switch out of the steering wheel. Then you want to separate the tab on the back that connects the harness to the switch. Then pull the switch free.
You can see the new switch from 1A Auto is identical, and it's going to fit exactly the same.
Take your pair of pliers and just grab onto the harness. Then you want to just push the switch onto the harness. It can take a couple tries to just line it up right, but once you get it, you'll hear it click. Then you can just push the switch back into place, put your key into accessory, and test it out. You can see it works, so you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the steering wheel mounted personalized setting switch on this 2003 GMC Envoy XL. The items that you'll need for this include a new personalized setting switch from 1AAuto.com, a flat blade screwdriver, and a part of pliers.
Carefully pry out on the switch with a flat blade screwdriver, and you want to angle it so you can get in behind it. Press on the tab on the middle of the harness to disconnect the harness, and the switch will pull free.
You can see the switch from 1A Auto is very similar and will fit exactly the same and work the same.
Take your pair of pliers, grab on to the harness, and then just push the switch back on to the harness. It may take a couple tries to line it up, but once you get it, you'll hear it click. Then, just push the switch back into place.
Put your key into accessory and then just test it out. You can see it works, so you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
