2004 Subaru Outback Front 10 Piece Drivetrain Kit TRQ CSA80112

Product Features

TRQ drivetrain kits are manufactured using premium raw materials to restore original performance. Each TRQ drivetrain component is designed to be a direct, maintenance-free replacement to the stock unit. To extend the service life of your drivetrain, TRQ recommends replacing wheel hubs, bearings, and constant velocity (CV) drive axles at the same time to ensure even wear of components and improved ride comfort. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

Note: This is correct for models with or without ABS brakes.  The tone ring can be removed if the original CV axle did not have one and the vehicle did not originally come equipped with ABS brakes.

Note: You will need to reuse your original inner stub shaft with this new replacement CV axle.  The splined shaft on the inner joint from your original assembly can be removed and installed onto the new CV assembly.

Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions.

For quality fit, finish, and easy installation.

For longer-lasting life and consistent performance under different road conditions.

And made of brand new components, held to tighter tolerances for better consistency than rebuilt parts.

Item Condition: New