Replaces
Replaces 1962-64 Pontiac Catalina 2 Door Hardtop Automatic Transmission with Console Complete Carpet Auto Custom Carpets 17647-230-1224000000
$292.95
Replaces 1961-64 Pontiac Catalina 4 Door Sedan 4 Speed Manual Transmission Complete Carpet Auto Custom Carpets 17147-230-1243000000
$292.95
Replaces 1961-64 Pontiac Catalina 4 Door Hardtop 4 Speed Manual Transmission Complete Carpet Auto Custom Carpets 17144-230-1231000000
$292.95
Replaces 1961-64 Pontiac Catalina 4 Door Hardtop Automatic Transmission Complete Carpet Auto Custom Carpets 1327-230-1224000000
$292.95
Replaces 1961-64 Pontiac Catalina 2 Door Sedan 4 Speed Manual Transmission Complete Carpet Auto Custom Carpets 17146-230-1224000000
$292.95
Replaces 1962-64 Pontiac Catalina 4 Door Hardtop Automatic Transmission with Console Complete Carpet Auto Custom Carpets 17649-230-1243000000
$292.95
Replaces 1961-64 Pontiac Catalina 4 Door Sedan Automatic Transmission Complete Carpet Auto Custom Carpets 1326-230-1228000000
$292.95
Replaces 1962-64 Pontiac Catalina 2 Door Hardtop Automatic Transmission with Console Complete Carpet Auto Custom Carpets 17647-230-1243000000
$292.95
Replaces 1961-64 Pontiac Catalina 2 Door Hardtop 4 Speed Manual Transmission Complete Carpet Auto Custom Carpets 17142-230-1245000000
$292.95
Replaces 1961-64 Pontiac Catalina 4 Door Sedan Automatic Transmission Complete Carpet Auto Custom Carpets 1326-230-1225000000
$292.95
Part Details
Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace a front sway bar link on this 2003 Chevy Monte Carlo. We show you on the passenger's side, but the driver's side is the same procedure. The items you'll need include a new front sway bar link from 1AAuto.com, 13mm, 14mm and 19mm socket, a ratchet, a 14mm wrench, and jack and jack stands.
Start off by just loosening up these lug nut caps. Now you can remove your lug nuts. If you don't have air-powered tools you want to loosen these up while the vehicle's on the ground. Then raise the vehicle and remove them the rest of the way. If you do have air-powered tools, you can just remove them right here. For this repair it's important to note you have to have both wheels off the ground. You can't just jack one wheel up. It'll make this repair difficult.
Spray down the top of the link with some penetrating oil. Then use a 14mm wrench to hold the top, and a 14mm socket and ratchet on the bottom. Now, this actually comes apart easily. It's not uncommon, but sometimes the link is totally broken and you don't even have to do this step. You just pull the remains out. Also, sometimes they're frozen up so bad you have to use a saw or a torch to cut the links out. Pull the top bushings off and push the sway bar link down and out, and then remove the bushings in the center.
Take your sway bar link and put the center bushings in first. Then run your sway bar link up through the bushings. Then replace the top bushing, the washer, and the nut. Just twist that nut on. Once you have it on there securely, you want to lower your vehicle down onto the jack stands so that all the pressure is on the suspension. Then tighten up the sway bar the rest of the way.
Then replace your wheel and each of the lug nuts. You want to just tighten them preliminary, and then lower the vehicle and tighten them the rest of the way. Now torque each of these to a hundred foot-pounds in a crossing pattern. Then replace your hubcap and tighten up the lug nut caps.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
