Replaces
Replaces 8 Piece Ignition Coil Set Delphi DEEEK00002
$389.95
Replaces Chevrolet GMC Buick Isuzu Saab Fuel Pump Module Assembly Delphi FG0515
$370.95
Replaces 8 Piece Ignition Coil Set Hitachi Automotive HIERK00043
$354.95
Replaces Chevrolet GMC Buick Isuzu Saab Front Ceramic Brake Pad & Rotor Kit with Calipers & Hoses TRQ BKA29722
$343.95
Replaces Chevrolet GMC Buick Isuzu Saab Front Semi-Metallic Brake Pad & Rotor Kit with Calipers & Hoses TRQ BKA29723
$340.95
Replaces 8 Piece Ignition Coil Set Hitachi Automotive HIERK00044
$335.95
Replaces Chevrolet GMC Buick Isuzu Saab Front Ceramic Performance Brake Pad & Rotor Kit with Calipers TRQ Performance BKA26173
$319.95
Replaces Chevrolet GMC Buick Isuzu Saab Front Semi-Metallic Performance Brake Pad & Rotor Kit with Calipers TRQ Performance BKA26325
$314.95
Replaces Chevrolet GMC Buick Isuzu Saab Front Ceramic Brake Pad & Rotor Kit with Calipers TRQ BKA25224
$299.95
Replaces Chevrolet GMC Buick Isuzu Saab Front & Rear Ceramic Performance Brake Pad & Rotor Kit TRQ Performance BKA12732
$290.95
Item Condition:
New
1 Year Warranty
This item is backed by our 1-year warranty. In the event this item should fail during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com your source for quality replacement parts and the best service on the internet.
This video we're going to show you how to replace the taillight connector plate in this 2004 Chevy Trailblazer. Pretty easy job, you just need a Phillips screwdriver and this is usually a problem if your lights are malfunctioning, but the bulbs all seem to be fine.
Start by removing two Phillips screws. Once you have those screws out you just want to kind of pull on your lamp and it comes out pretty easy. There are two tabs here that go here and disconnect your harness there's a little tab right here. Now this board can get shorted out, we just want to replace it. We just want to remove three screws. You can see that the bulbs are in this, you just want to remove the bulbs, put them in for the new one and. Screw back in. Now take your white two tabs, you can line them up here. First, see the connector plate plugs right in and then just kind of look from the side here, see those tabs go in. Should be all set.
We hope this helps you out. Brought to you by www.1AAuto.com your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for you on the internet and in person.
