This item is backed by our 1-year warranty. In the event this item should fail during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Tail Light Circuit Board 2002-09 Chevy Trailblazer
Created on:
Tools used
Phillips Head Screwdriver
1. Removing the Taillight Connector Plate
Remove the two Phillips screws on the side of the taillight.
Pull the taillight out and off.
Disconnect the harness.
Remove the three screws
Pull the connector plate off.
2. Replace the Taillight Connector Plate
Remove the bulbs and push them into the new connector plate.
Push the new connector plate into place.
Replace the three screws.
Reconnect the harness.
Line up and the taillight and push it into place.
Replace the two Phillips Screws.
Brought to you by 1AAuto.com your source for quality replacement parts and the best service on the internet.
This video we're going to show you how to replace the taillight connector plate in this 2004 Chevy Trailblazer. Pretty easy job, you just need a Phillips screwdriver and this is usually a problem if your lights are malfunctioning, but the bulbs all seem to be fine.
Start by removing two Phillips screws. Once you have those screws out you just want to kind of pull on your lamp and it comes out pretty easy. There are two tabs here that go here and disconnect your harness there's a little tab right here. Now this board can get shorted out, we just want to replace it. We just want to remove three screws. You can see that the bulbs are in this, you just want to remove the bulbs, put them in for the new one and. Screw back in. Now take your white two tabs, you can line them up here. First, see the connector plate plugs right in and then just kind of look from the side here, see those tabs go in. Should be all set.
We hope this helps you out. Brought to you by www.1AAuto.com your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for you on the internet and in person.
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Oldsmobile is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Oldsmobile or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.