Install Tip: When replacing steering components, have a professional alignment performed afterwards. This ensures proper tracking and even tire wear.
Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
How to Replace Inner Tie Rods 2012-2017 Toyota Camry
How to Replace Inner Tie Rods 2012-2017 Toyota Camry
Created on: 2024-03-18
Tools used
Torque Wrench
Hammer
Socket Extensions
Rust Penetrant
Pry Bar
17mm Socket
Jack Stands
19mm Wrench
Safety Glasses
21mm Socket
Side Cutters
Locking Pliers
Rubber Mallet
Gloves
Inner Tie Rod Removal Tool
Wheel Chocks
Anti-Seize Grease
Floor Jack
Needle nose pliers
1/2 Inch Breaker Bar
PSA73460
In Stock
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Toyota is a registered trademark of Toyota Motor Corporation. 1A Auto is not affiliated with or sponsored by Toyota or Toyota Motor Corporation.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.