Returns: Parts with electrical components cannot be returned once installed.
Left Hand Drive:
All of our auto parts are intended for Left Hand Drive USDM vehicles. If your vehicle is Right Hand Drive, please ensure the part is correct for your specific vehicle.
Attention California Customers:
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Heater Blower Motor 1997-2001 Toyota Camry
How to Replace Blower Motor 1997-2001 Toyota Camry
Created on:
Tools used
Hi. I'm Tony with 1A Auto here to talk to you today about the blower motor and fan assembly from this ‘98 Toyota Camry behind me. You can see we have our old part that we removed from the vehicle and our new replacement piece from 1AAuto.com.
As you can see, we have the exact same mounting locations on the bottom. The fans are a little bit different, but they're going to work the exact same way. We have the same two pin connector on the bottom. If you’re A/C or heat isn't blowing like it used to or you hear a rattling noise whenever you turn your fans on, this new part from 1A Auto is going to fix you up right.
Tools used
Flat Blade Screwdriver
T25 Torx Driver
1. Removing the Blower Motor
Pull the lower cover from the glove box straight down
Disconnect the blower motor electrical connector
Remove the three screws that hold the blower motor with a flat blade screwdriver
Remove the blower motor
2. Installing the Blower Motor
Insert the blower motor into place
Tighten the three screws to the blower motor
Connect the blower motor electric connector
Insert the lower cover to the glove box
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the A/C and heater, lower motor. This is a 1998 Toyota Camry, which is the same for 1997 to 200. You'll need a new blower motor from 1AAuto.com and a flat blade or a T25 Torx driver.
Remove the lower plastic cover onto the passenger side of the dashboard by pulling straight down and toward you. Remove the electrical connector at the bottom of the blower motor. Remove the three screws, holding the blower motor into the HVAC housing. This can be done with a Torx bit, a 10 millimeter socket or a flat blade screwdriver which we'll use. Remove the blower motor from the bottom of the HVAC housing.
Here we have our old part that we removed from the vehicle and our new part from 1A Auto. As you can see, there are some slight aesthetic differences in the actual fan, but it's still going to function properly.
We have the same mounting locations, the same 2-pin connector, and the same outer diameter to fit into our HVAC box so if your heat and A/C isn't blowing like it used to, or you hear a noise when you run your fans. This new part from 1A Auto is going to fix you up right.
Reinstall the blower motor into the HVAC box. Reinstall your three screws and either a Torx bit, a 10 millimeter, or a flat blade screwdriver.
To show you that this hardwood can be installed with three different tools, we're going to use a T25 Torx screwdriver to reinstall the hardware. Reinstall the electrical connector.
Install the rear pin into the hole by the firewall and snap the front clips into place.
Thanks for tuning in. We hope this video helped you out. Next time you need parts for your car, please visit 1AAuto.com. Also check out our other helpful how-to and diagnosis videos.
HMA84816
In Stock
Product Reviews
Loading reviews
4.74/ 5.019
19 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
15
3
1
0
0
Thomas
July 24, 2017
Easy Replacement. The new blower fit without a problem.
Delivery was fast and easy and the price was very reasonable.
I will order again from 1A Auto.
Quality products
Jonathan
September 25, 2017
I saw this and knew I had to get it when the local auto parts store was almost double. I watched the video the guys had posted online and it was informative. I was trying to maneuver my way in the same position they were in which would of made it for an easy install. But I ran into issues when trying to get screw off by some wiring harnesses. I ended up having to take the glove box off and then the wiring harness mount off to get to the blower motor a lot easier. All in all, it fixed the problem and was an in expensive part. Thanks!
Good product
dale
February 8, 2018
Electric plug from car didn't fit into blower. Had to cut away a little plastic 1st.
Blower motor
E
July 20, 2019
Great quality part and easy to follow tutorial video on how to install
Great blower
J
September 25, 2019
This is exactly what we needed and for a good price.
Item was perfect and works beautifully!
Zachary
November 20, 2019
Item was perfect and works beautifully, the price was also better than anywhere I had found. Fast shipping and I have no complaints.
fan motor for my 2001 Camry.
David
November 23, 2019
The product arrived quickly and thanks to the videos 1A uploaded it was quick and easy to install it. Thanks for all you guys do , not just selling the parts but helping in demonstrating how to replace the part, I will be buying from you again.
Installation and performance of blower motor
Jacob
September 9, 2020
Everything is as needed from this new blower motor, but taking the original one off was a bit tricky but possible the new motor is an exact replica of the original installation was easy and as for the performance the motor definitely blows out my hot and cold air more so pretty much this product is very recommended if your looking for a new blower motor
I'm happy
George
November 15, 2020
The blower motor was as thy said it would be thank I have a defroster and heat again
Shipped quicly and was an easy repair
B
November 29, 2020
heater is working like new again and the pricing was great.
perfect fit
mark
November 29, 2020
After watching the install video that was such so detailed and perfectly filmed, why would anyone buy the part any where else?
Very pleased!!!
good quality
David
November 14, 2021
Fit perfect and is running great
Great Product @ Great Price
Isaac
December 17, 2021
Great product and so far works like a charm. I will admit and point out (as other people have) that I did need to alter the plug in area a bit to get it to fit but after shaving away some of the plastic it fit securely in place.
Timothy
December 21, 2021
Works great
Dan
April 26, 2022
Works great.
Whatevers
Prontap
June 10, 2023
Not sure it works yet need blower resistor but it took forever to get here
Good unit tricky replacements
Chris
June 19, 2023
It works perfectly. The video that shows how to replace is a bit misleading. I had to remove glovebox and some items attached to the blower in order to replace it on my 1997 Camry
Derek
January 23, 2025
It works good but if your vin # has a J in it the blower motor is hard wired in and does not have the easy unplug and plug the new one in .
Works great!
Leitow
January 30, 2025
Works great and was easy to replace! 3 screws and one plug. Basically plug and play! The new motor is quiet and has amazing air flow.
Customer Q&A
How do i replace the servo motor on 98 camry?December 6, 2020
Robert F
10
Hello Robert, so on the passanger side underneath the dash is a plastic cover that just pops right off. That is where you will find the blower motor. On holding that motor in are 3 screws. And it takes a little finagling, especially the one screw that by the wiring. You pretty much just have to man handle that wiring moving it out of the way. I've done this there are other ways of doing it remove a side panel, take the glove box door off, but it is not necessary. I have done this twice now and the second time was a breeze. I wish you luck but I know you can do this.
December 6, 2020
Paul R
10
Written and video installation instructions are found on the product page under the "How-To & Tools" tab.
We're constantly adding new installation video instructions. If we do not have one for your vehicle on the product listing page, please check again at a later time or check our Video Library to see similar repairs here: https://www.1aauto.com/videos
December 7, 2020
Christa R
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Toyota is a registered trademark of Toyota Motor Corporation. 1A Auto is not affiliated with or sponsored by Toyota or Toyota Motor Corporation.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.