Replaces
Part Details
Product Features
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
In this video, we show you how to replace the side marker lights, that light right next to the headlight on this '94 Corolla, the same as any '94 to '97. We show you both replacing the whole assembly, as well as just the bulb. The only tool you'll need is a Phillip's screwdriver.
Pop your hood, open it up and attach the support rod. There's going to be a screw to remove right here. Then what you want to do with these, you want to kind of shake them around a little bit. There's a pin in here that holds it that can be tight sometimes. So, just give it a good shake. Then I reach in with this finger and I can latch around the piece of plastic that's going in this way and pull with both hands. Bring it up and out.
Then this goes counter-clockwise and pulls out. Then there's a bulb that will come out.
Here's our new light from 1A Auto. Obviously if your corner light's broken you're going to need a new one. You can also see it's just a little clearer, a little nicer and cleaner than the original. Put the bulb in, twist it clockwise, then put the light in. Make sure the bottom is going into the pin. Push back some. Insert your screw and then tighten it up. Again, you don't need to have this too tight, just make sure it's in there firm. You don't want to over tighten it.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
