Replaces
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video we're going to show you how to replace the front bumper mounted signal light on this '94 Corolla same as any '94 to '97. The only tool you'll need is a Phillips screw driver.
With a Phillips screw driver, get this screw right on the side here. Pull that screw out. Once you get it a certain way out, then use that. Pull the light out. Pull it to the side. Right here, once you get it out there's just a little tab. Push on that tab or you can rotate your bulb counter clockwise.
You see here's my light. To switch these bulbs, if that's what you're looking to do, turn counter clockwise and out. Put it back in. Push down clockwise.
See the new light from 1Aauto is nice and clear. Obviously if you're parking lights been wiped out, you'll need a new one. It installs just like the original. Put the light in. I can't get it in the right spot here. Then turn it clockwise. Lock it into place. This tab needs to go in there. Get the screw to go into its hole.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
