Kit Includes: (1) Front Ceramic Brake Pad Set with Contact Point Grease & Hardware (2) Front Brake Rotors
Specification
Location
Front
TRQ brake kits are designed to restore your brake system to like-new performance. TRQ brake pads are positive molded, thermal scorched, chamfered, and utilize a multi-layer shim for enhanced performance and service life. TRQ rotors have a non-directional finish that reduces the break-in period for new rotors as well as reducing vibrations throughout the rotor’s lifecycle. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Positive Molded - Less dust resulting in clean wheels
G3000 Casting Alloy - Reduced noise and improved wear resistance
Application Specific Design - Extended service life, no modifications
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
How to Replace Brake Kit 1992-2001 Toyota Camry
Created on:
Tools used
21mm Socket
Large C-Clamp
Flat Blade Screwdriver
14mm Socket
17mm Socket
Jack Stands
Wire Ties
Lug Wrench
Ratchet
Floor Jack
1. Removing the Wheel
Remove hub cap
While your car is still on the ground, use your 21mm socket to loosen your lug nuts
Jack up and secure your car with jack stands
Remove the lug nuts with your 21mm socket and ratchet
Remove the wheel and set aside
2. Removing the Calipers
Remove the 14mm bolts to remove the calipers
Use a wire tie to fasten the caliper out of the way
Use your screwdriver to pry out your brake pads
Use your 17mm socket and ratchet to remove your caliper brackets to access the rotors
Pull off the brake rotor
3. Installing the New Rotor and Pads
Clean new rotor with brake cleaner
Check your caliper pins to make sure they are in good working order
Put your caliper bracket back on, and tighten the 17mm bolts to 80 ft lbs
Insert your new pads into the brackets
Use your C-clamp or caliper tool to compress your caliper
Place your caliper onto the bracket
Tighten your 14mm bolts to 25 ft lbs
4. Reinstalling the Wheel
Make sure to use a star pattern when putting your wheel lugs back on
Tighten to 100 ft lbs
Replace hubcap
5. Test and Set Brakes
Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place
Test the brakes in your driveway before taking the car onto the road
Set your rotors by evenly braking from 30mph to 10mph, 50mph-30mph and finally 70mph to 40mph
Obviously this is best done on a straight back road without any traffic
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet.
Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing or maintaining your vehicle. I'm going to use my 20-plus years' experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly. That's going to save you time and money. Thank you and enjoy the video.
In this video we'll show you how to service the front disc brakes on this 1994 Camry, pretty much the same as any 1992 to 1996 Camry. The tools you'll need are a large flat-blade screwdriver, a 21 mm socket and ratchet or your lug wrench, 14 and 17 mm sockets with ratchet, a torque wrench, a large C-clamp and a jack and jack stands.
First we'll remove the hubcap. Use a large screwdriver or a pry bar. Remove the lug nuts from your wheel. I've got a 21 mm socket and I have an air wrench. You can obviously leave your car on the ground, use your lug wrench or a 21 mm socket and wrench to get them off.
As you can see I've turned the wheels, and to remove the caliper which you need to do to remove the pads you've got two 14 mm bolts, one here and then one up here. You can remove the caliper and the pads and then if you want to replace the rotor, which actually this car the rotors look really good. If you did want to replace the rotors you've got bolts that need a 17 mm bolt here and then one down lower right there.
Remove these 14 mm bolts just using a regular wrench. You can see that it's not hard to do. It's just going to take some pressure but not a ton. The other bolt is removed. Use your screwdriver and pull the caliper right off. Support it up here. Here are my pads. I'm just using my screwdriver to pry them out. You can see that they're pretty well worn, but as I said my disc is nice. What you want to do is just kind of take the back of your fingernail and run it back and forth across there. If it's nice and smooth then you're okay. If it has any deep grooves or gouges in it you'll want to replace them.
If your discs are in bad shape and you want to replace them, it is 17 mm bolts down in here. These ones are going to be quite a bit more torque to get them loose. I always like to hang up and hang down. That's usually the best way to get torque on them, or stand on the wrench. That comes off and once that bracket is off the disc for the rotor generally just comes right off. Just to show you, if you do order new discs from 1A Auto, they are going to go on there just like the originals and work for you. Like I said, these are in good shape, and I'm not a person to waste good discs. I'll put those back on.
One thing you'll want to do is take these little pins out. These look nice. They are well lubricated. They slide well. You can either take them out or just make sure that they slide back and forth with no drag. Tighten these up to the foot panels. Here are the old pads, new pads from 1A Auto. You can see they've got quite a bit more meat on them and they even have the plates and everything. They actually just kind of go down into the little. Just squeeze them together. Next, you're going to want to use a C-clamp and you're going to want to force the piston back into the caliper here. You can see the piston right in there. I'm just going to keep this C-clamp right on there and it goes back in pretty easy without a whole lot of pressure. You probably can loosen up your cap on your brake fluid reservoir and make sure it's not overfull because it will leak out if there is too much in there.
Before you install your caliper you'll want to put this little spring back in. Just kind of keeps them apart so they don't squeeze on the rotor. What we did with that C-clamp is we pushed this piston back in. Now this will go down on there very nice. Now the two 14 mm bolts. These 14 mm bolts you'll need to tighten up to about 25-foot pounds. I've got a wrench holding the stud that they're going into. Okay, and 25-foot pounds is not a lot, but it is the right amount. Let's see here. These don't really do any of the braking. The braking energy is absorbed by that big bracket. These just kind of hold that caliper in place and let it float. Now we'll do the other side and then put the wheel back on and when you put the wheel back on you want to torque the lug nuts to 100-foot pounds and then before you drive your car anywhere you want to get in, start it up and pump the brakes a few times to make sure that piston gets back out and the brakes are working. They'll take a few pumps to the brakes to make sure that everything is back where it should be. Then before you drive your care just put it in gear, make sure the brakes hold then do a stop from 5 miles an hour before you go out and test it on the road.
Here we've put the wheel on. I am just preliminarily tightening up the lug nuts with an air gun, and now I'm tightening them to 100-foot pounds using a star pattern with the torque wrench. Install the center cover; line up the indent on your valve stem there.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free, 888-844-3393. We're the company that's here for you on the internet and in person. Thank you.
BKA10595
In Stock
Product Reviews
Loading reviews
4.67/ 5.027
27 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
23
2
0
1
1
High Quility
Greg
February 1, 2017
I was very impressed with the quality of these rotors and pads. I have around 500 miles on them so far and they are quite and work well.
Use this website number of times
Mary
February 13, 2017
I am very satisfied with the parts that I received from a one owner
Great rotor
Jay
March 14, 2017
The rotor work great I drive a taxi so a lot miles and braking and still working good after 30 k Mille I didn't use the pad I like to use autozone bad with life time warranty I can switch them any time I need to
1A Auto Delivers Again
Jeff
November 6, 2017
I ordered this brake kit for my wife's mini van, and 1A Auto delivered as always. The price was great, delivery was fast and the rotors and pads were exactly as described.
I highly recommend 1A Auto for whatever you need to keep your ride running.
Lexus ES330 Brakes
C
March 25, 2019
Just as pictured, great condition! Brand new, easy to install. Direct fit to my 2004 Lexus ES 330. All components were in new condition, wrapped up and ready. So far, with a few days driving, they work great! Fixed my cars issues perfectly. Only thing I wish it had was the hardware, shims I believe they are called, for the excess space in the pads. They did not come with it. But they dont tell you they do anyways so no harm or foul. Ive ordered from them multiple times, every time was flawless! 5 stars!
Car parts ordered for my 06 camry
E
July 16, 2019
I wanna say that the parts that I got from this website are literally good parts. You will not be ripped off for sure. The only thing I had a problem with, was I ordered pads and rotors for my front brakes for my car. They didnt have an option for 4 cylinder engine Camry, which I owned. They only had the two models for the 6 cylinder engine models. So I ordered that not knowing it wouldnt fit. They should have all options for car engines. You wouldnt think a different engine would affect your brakes, but it does. Besides that, the other parts I ordered were amazing and the price is right for sure. Good job 1a!
-Eric
Excellent service and good
GUY
August 12, 2019
I am very happy with my purchase and my mechanic too, he put all that together with no problem, I'll be back in the future.
Thank you 1AAUTO
Great setup
D
September 11, 2019
Quality components at a great price. Arrived promptly and everything was in order. Job went very smoothly. I couldnt be more pleased with the product and the service.
WORKED OUT FINE
CHRISTOPHER
November 22, 2019
THIS KIT ARRIVED QUICKLY, FITTED CORRECTLY, AND WORKS GREAT
Brakes and rotors.
J
February 13, 2020
This was well worth the money. For the quality and the prices you cant bet it!
Great price and quality
S
March 31, 2020
Got this set as part of a complete front end rebuild (bushings, ball joints) on my Sienna. As always, the parts were first rate and fitment was perfect.
Minivan drive like a dream once again.
Love this Company!
B
May 8, 2020
I discovered this company about eight years ago and I love doing business with them. The How To videos are what drew me to the company and the quality parts have kept me coming back!
I put a significant amount of miles on my car and I change the brakes about once a year. I have ordered parts that show up on time and for my car. I have never had to return an order!
1A Auto makes personal auto repair inexpensive and easy!
Great price and quality brakes.
J
August 17, 2020
First time purchasing from 1a auto and loved the quick shipping and quality product. Everything was right and fit into place seamlessly. Ordered more parts right after.
Great Price
W
September 16, 2020
I only paid around $75 and got two rotors plus two sets of brakes. Seems like a good deal to me
Thankful
Melvin
September 29, 2020
So glad that 1AAuto had the parts that fit exactly as advertised.
Perfect Fit
David
October 28, 2020
I was completely satisfied with the quality of the brake pads and rotors. I had been noticing a pulsing brake pedal on our 2004 Toyota Sienna when applying the brakes when braking going downhill. Since the wheels were in balance, I suspected a warped rotor. The new rotors eliminated the problem. Ive now got about 800 miles of mountain driving on them with no issues. A very good value and I can highly recommend the rotor and pad set.
John
December 4, 2021
Perfect fit no break dust
Dont Fit the V6 Camrys that have rear disc.
Stephen
January 28, 2022
These do not fit your Camry if you have the v6 and your rear brakes are disc. These are for the Camrys with rear drums. My car requires a tad bit bigger rotor and different brake pads. I wish the 02-06 Camry had standardized their brakes but they didnt. So remember your these front brakes dont fit on the V6 with rear discs. Im sure these brakes work fine but the fitment guide 1aauto is using here is wrong.
A1 Service
Mark
April 5, 2022
This is a great company to do business with, great service, quick shipping and quality parts.
Brake parts
Robert
October 23, 2022
All good east install
Great deal!
Gustavo
November 30, 2022
The brakes work great, arrived quickly and were priced right.
Brad
February 22, 2023
They work great.
Jackson
May 7, 2023
Perfect fit, easy to install, fast delivery. Excellent product.
Dennis
May 25, 2023
First time I ever attempted such a repair on a vehicle. Thanks to your guidance on the correct parts and your instructional video all went well for a first timer. Not bad for a 71 year old, if l do say so myself. So far no squeaking and still stopping better than ever.
Michael
January 16, 2024
Great fit, no issues. Excellent quality
Re
March 25, 2024
Great products highly recommend them
Two thumbs up
Christopher
August 17, 2024
Excellent products and excellent how-to videos. You guys have saved me hundreds of dollars. Many thanks from a return customer.
Customer Q&A
Do thes brake kits fit awd sienna ?April 24, 2023
Barbara W
10
Yes, this kit will fit all 2004-2010 Toyota Sienna's.
April 25, 2023
Andra M
10
Envo rpido se ven bien. Toca esperar con los das que tal es la calidad. Pero instalaron bien
April 29, 2023
Isabella L
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Toyota is a registered trademark of Toyota Motor Corporation. 1A Auto is not affiliated with or sponsored by Toyota or Toyota Motor Corporation.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.