Replaces

2003 Toyota Solara L4 2.4L Japan Built Models (1st VIN Digit J) 8 Piece Ignition Coil Set TRQ ICA55413

$ 97.95

FREE SAME DAY SHIPPING

ICA55413

In Stock

This part doesn’t fit a . Select from parts that fit.

Show parts that fit

Orders must be placed by 2pm ET

1A Auto Lifetime Warranty

Description

Vehicle Fit

Warranty & Shipping

How-To & Tools

Part Details

Kit Includes:
(4) Ignition Coils
(4) Ignition Coil Wire Harnesses
Quantity: 8 Piece
Ignition Coil Type: Direct Replacement
Ignition Coil Color: Gray

Specification

Engine Displacement (Metric)

L4 2.4L

Vehicle Build Location

Japan Built Models (1st VIN Digit J)

TRQ ignition coils will have your engine running like new. TRQ ignition coils are manufactured to precise specifications using premium raw materials to optimize each vehicle's ignition system. To ensure peak performance, TRQ recommends replacing ignition coils in sets to prevent electrical output imbalances. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.

Product Features

High dielectric epoxy and reinforced bobbins for extended service life

Rubber, Silicone, or Phenolic Resin Shell: Prevents premature boot wear

Application Specific Design: No modifications required

Complete repair to restore your engine to like-new condition

Item Condition: New

Attention California Customers:

proposition 65 icon WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

How to Replace Ignition Coils 2002-11 Toyota Camry

Created on:

Tools used

Socket Extensions

Flat Blade Screwdriver

10mm Socket

Ratchet

1. Disconnecting the Battery

Disconnect the negative terminal with a 10mm socket

2. Removing the Ignition Coils

Remove the two 10mm nuts from the engine cover Remove the engine cover Disconnect the ignition coil wiring harness Remove the 10mm bolt from the ignition coil Remove the ignition coil

3. Installing the Ignition Coils

Insert the ignition coil into place Tighten the 10mm bolt to the ignition coil Connect the wiring harness Reinstall the engine cover Tighten the two 10mm bolts to the cover

4. Connecting the Battery

Connect the negative terminal with a 10mm socket

Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!

Disconnect the negative battery terminal, it's a 10 millimeter nut.

Remove the plastic engine cover, two 10 millimeter nuts on the top. Cover should just slip off, let me put that aside. These are your four ignition coil packs, right on top of the engine. To remove them, well this tab is broken, but if the tab is not broken you push the tab in, pull it out. Push the lock in and pull it off.

To remove the coil pack, loosen the 10 millimeter bolt that's holding it into the head. This procedure's the same for the other three coils. Pull it straight up, and it'll come right off the spark plug. Repeat the procedure for the other three coils.

Install the new coil, and put it down over the spark plug. Until that gets tight, I'm just going to stop. Reconnect the modular connectors. Reinstall the plastic engine cover. The spark plugs and coils have been changed.

Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.

Product Reviews

Loading reviews

Customer Q&A

No questions have been asked about this item.