Replaces

Toyota Sequoia Tundra Power Rack & Pinion Assembly TRQ PSA67690

00-06 Toyota Tundra; 01-07 Sequoia Power Steering Rack & Pinion Assembly

$ 375.95

$528.95

29% OFF

$528.95

29% OFF

FREE SAME DAY SHIPPING

Read 33 REVIEWS

PSA67690

In Stock

This part doesn’t fit a . Select from parts that fit.

Show parts that fit

Orders must be placed by 2pm ET

1A Auto Lifetime Warranty

Product Reviews

Loading reviews

4.56/ 5.0

Rack and pinion for a Toyota

Timothy

I'm a Toyota tech. My wife's Sequoia needed a steering rack. I purchased a steering rack from 1A Auto. Very nice quality, great price (alot cheaper than the factory Toyota steering rack) & fast shipping. I'm very pleased. The quality of the part was just as good as the factory Toyota parts I install everyday! Thank you A+++++

Exactly as advertised

Excellent fit and finish, installation went as as expected. Would buy parts from 1aauto again

2001 Tundra rack and pinion assembly with steering parts

I received the order very quickly within a few days even with the Christmas season busy buying period. Products purchased have not been installed yet but look to be good quality. I bought these items at 1AAuto due to mainly the purchase price and included shipping. Very easy to search and purchase online. GB

2001 Tundra - perfect fit and operation

I needed to replace my rack and pinion on my 2001 tundra. This piece came at a great price, with a great warranty, and was an exact fit. It looked and felt the same quality as the OEM part that failed. 1A Auto has quickly became my go-to parts destination.

Excellent!

Great service, quality product.

Very happy

Von

Im very satisfied and the salesperson is very helpful and friendly.

Rack& Pinion

Price was right, delivery was fast and free and it all fit perfectly. Thank You, Lee

Ismeal

Good

Saved a ton!!

Brian

Quick shipping and good packaging. Part matched the OEM perfect and works great. Overall saved me over 400.00 from a local shop.

perfect fit

David

shipped on time,best price i found,only reason i gave it 4 stars is it didn't include a dust cover for the steering gear shaft

2003 Tundra

Thanks to 1A Auto my Tundra is back on the road. I had the frame replaced by a local dealership. At that time they had to replace the rack and pinion and hoses because they couldn't remove the old lines without damaging them. After only about 12k miles the passenger outer seals began to leak badly. Lucky to get home before losing most of the fluid. I replaced the outer seals 3 times over the next 15k miles. Finally had to bite the bullet and replace the whole rack. I chose 1A Auto because I have had good luck with parts in the past. The price was good and I received it in less than a week during the Holidays. I am looking forward to the reliability of my Tundra once again thanks!

01 Toyota Tundra 2wd.

Jim

Easy from the get go. Great purchase and fast shipping. Great product. My only complaint is it did not come with the o-rings where it connects to the lines.

Russell

It fit and worked. Needed a seal that was not included.

Works Good, Oem Quality

Luke

Slipped right on, is what it says it is

Amazing quality/great fit

Chris

Great fit, steering feels like a brand new car!!

Perfect fit.

Leo

Works great! No issues so far! Bought poly bushings and the steering response is way better!

Fits

George

Did not come with o rings for the power steering fluid supply and return lines, unfortunately. Other than that, perfect fit, hopefully it lasts.

Good

Christopher

Fit right up good you need bushings though

2003 Sequoia Rack and Pinion

Conrad

Install was easy enough. Rack looked to be in good condition. Gave it 3 stars because after about 3 weeks, the steering wheel still has a difficult time straightening out after a turn. I have new tires, new outer tie rods and had an alignment done right after the steering rack install. Shop that aligned it said it may improve as new rack wears in, but couldnt say for sure.

Sequoia rack

Kevin

Has been in my vehicle for over 2 years and is working great.

Works great.

Don

Works like brand new. Knocking the steering column drop down shaft and knuckle off the old one was the hardest thing to do. With a foot long 1/2 drive extension you could really hammer up on that joint to finally win the battle. I would buy this product again.

Donald

Fit great 1st one shipped leaked but 1A replaced in timely fashion. Thanks will continue to order

Smooth steering, works great!

Jeff

Quality seems good. Installed myself. Packaging for shipping was not very good as box was torn up and unit was sticking out of box on two sides. I recommend you order new outer tie rods and the o-rings for power steering lines when you order this rack and pinion. Hopefully this unit will last a long time.

Rack & Pinion Perfection

Greg

As always the part arrived when they said it would and was a perfect fit for my SUV. And it's been working great! Their How To video for installation guidance is awesome!

Works perfectly!

Iain

Great part!

Not the best quality. Does not match OEM spec.

Ammon

I am hoping the racks itself will last. I only have 14000 miles on this and had to replace the inner tie rod ends and the bushings. Also, the rack does not support a keyed lock ring for the new inner tie rod end so I will have to pull the boot back every once and a while to make sure it is not vibrating loose.

All good 1k miles in

Bryan

Worked good for me and holding up strong would recommend as an alternative to OEM

Tim

it work!

Daniel

Buttery smooth steering

Coby

It worked perfectly

Just about OEM!

William

Build quality was way better than I thought it would be.

Good replacement for OEM part.

Ruzivo

I installed the rack and pinion several years ago and have not had any problems with it all. Works as intended.

Cheap rack

Carl

Rack was noticeably of cheaper quality than the Toyota OEM unit. Especially the boots. Good enough for a truck which sees limited use. Threads on hydraulic fitting were poor. Scared I was going to strip them trying to reattach the power steering lines.

Joy

Total satisfaction with this company. Customer service and integrity is A1 . Rack and pinion was perfect for my 2001 Tundra and Im pleased with the whole experience. Commited customer now for my parts. Thankyou

Customer Q&A

Is an alignment recommended after installation ?

January 7, 2019

JuanTu3 J

Yes it is but after I put it in I never did and it was fine. If you see any abnormal wear on your tires you may want to go get it aligned.

January 7, 2019

Garrett A

Yes

January 7, 2019

Connie T

Not only recommended but required.

January 7, 2019

Richard A

Yes. For sure

January 8, 2019

B I

Highly recommended.

January 8, 2019

Donald E

yes. because even if you had it out I always got a alignments then you now it is true.

January 8, 2019

David C

I went ahead and had one done.

January 8, 2019

L A

Yes it is even if you think it is ok!! replace outer tie rod ends also that way you only have to align it 1 time for a while...

January 8, 2019

T S

Yes you most definitely need one.

March 13, 2019

H E

Installed and filled but power steering line leaking at fitting. Not crossthreaded and its in tight. Still a steady flow coming out in between nut and line. Did not leak or anything happen before. Any suggestions?

January 27, 2019

Alex T

The part may not be able to fit correctly for your vehicle. If this was an item purchased through us please give us a call so we can further assist you.

January 27, 2019

Emma F

What brand is this part?

March 8, 2019

M A

1A Auto's house brand parts are manufactured by various aftermarket companies specifically for us and built to your vehicle's exact OEM specifications.

March 8, 2019

Curtis L

Does this part come with all bushings ?

August 18, 2019

James T

This item will come with the bushings that you would need for the installation. Please let us know if you have any further questions.

August 18, 2019

Emma F

Yes bolt right on

August 21, 2019

Donald W

No, you have to purchase them separately.

August 26, 2019

Ruzivo N

Will this fit a 4 wheel drive 2002 tundra?

September 17, 2019

B L

Yes, according to the information you provided, this part will fit your vehicle. Please let us know if you have any other questions!

September 17, 2019

Emma F

Did the rack and pinion come with new mounting bushings?

October 10, 2019

Michael D

No, it did not. You have to buy them separately.

October 10, 2019

Ruzivo N

I believe so my mechanic didn't ask me to buy anything else.

October 10, 2019

H A

This assembly will not come with the bushings. I have attached a list of the parts that the kits include: Gear assembly Inner tie rods Rack boots Please let us know if you have any further questions.

October 10, 2019

Emma F

Any experience on a 2001 Toyota sequoia 4x4?

March 7, 2020

Jorge A

1A Auto's house brand parts are manufactured by various aftermarket companies specifically for us and built to your vehicle's exact OEM specifications. The fit and function will be the same if not better than OEM. According to the information you provided, this part will fit your vehicle. Please let us know if you have any other questions!

March 7, 2020

Curtis L

Is this OEM?

September 5, 2021

John D

If you are wondering if this is made by the same manufacturer that make Toyota brand parts, I'd have to say probably not. However, it hooked right up as if it was OEM and I've quite satisfied with this product on my 2006 Tundra for over a year now. Glad I bought it.

September 5, 2021

D A

It is not OEM

September 6, 2021

Ben J

Is there anything else I need to have to install the rack and pinion ?

October 5, 2022

John D

Yes you will need o rings for the power steering lines and bushings to connect it to the cross member.

October 6, 2022

Christopher K

I installed a bushing kit and a nylon sleeve when I replaced mine. Googled a video that had a lot of good information and very helpful with the swap out, hopefully this helps.

October 6, 2022

T L