Replaces
Genuine original equipment part (OEM) that was factory installed on your vehicle by the manufacturer.
1 Year Warranty
This item is backed by our 1-year warranty. In the event this item should fail during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
Hi everyone, Sue here at 1A Auto, and today were going to show you how to change the license plate bulbs on an ‘03 Tundra. You need any parts for your vehicle, click on the link below and head on over to 1aauto.com.
A Phillips screwdriver removes the plate light assembly. Take that screw right out and place it to the side, and then you just grab onto the assembly and pull forward. See the lip, and then you've got your connector in the back here. They don't give you much of a harness to push on it, but right there I'm going to just really twist the assembly and turn it off.
So to reinstall it, you take your light assembly, and you line up the notches. Seat it and turn. Lock it in, reverse procedure, bring that tab down, and seat it. Take your screwdriver with the Phillips screw on it, line it up, and lock it down.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
