Replaces
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet. In this video we're going to show you how to replace the taillight, either replace the taillight bulb or the procedure for replacing the entire taillight. The only tool you'll need is a 10-millimeter wrench or a socket wrench with ratchet and maybe a pair of pliers and a flat-blade screwdriver.
Starting with your tailgate, open there are two 10-millimeter bolts on each side for each light. You want to remove those 10-millimeter bolts. We'll just kind of speed through removing those. You can use a 10-millimeter wrench or a socket and ratchet like I have.
Once you have those bolts out, pull it firmly. If you're looking to just change your bulbs, turn them counterclockwise. The socket comes out. The bulbs just pull out of the sockets. Your harness goes down into there. Up underneath you want to unplug your connector. There's a tab right here. You press and unplug. Then the connector is held onto the frame. You have to pull it off. Then this clip here that holds the harness on, you pull that off as well. You can get that from 1AAuto. It comes with everything including a harness and plug.
You see my old light is perfectly fine. I'm not going to go through all that changing out of the harnesses and stuff. To re-install I'll move it into place and make sure these tabs go into here and then down there as well. We'll fast forward again as I thread those bolts in by hand first. I might have to push on the light a little bit to get the holes to line up. Tighten them up with the socket by hand. Then tighten them up firm with the ratchet.
We hope this helps you out, brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free. 888-844-3393. We're the company that's here for you on the internet and in person.
