Replaces
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by our 100% satisfaction guarantee. Visit us at 1AAuto.com, your trusted source for quality auto parts.
We have to pop off this cover that's on top of the engine. That just pops up. There's two points where it pops onto, so just kind of get them and then you work it out straight from the back, just like that. Let's see here, this is where it pop on here and here, and then these two tabs slide into the back. I'm going to set this aside so it doesn't get broken.
With the engine cover removed, your EVAP purge solenoid sits right here on this tab. See the two vacuum hoses and one electrical connector. Shouldn't need any special tools to undo this hose. It's got a white spring tab. Going to push down on it, slide it off. This electrical connector can flip the lock up with your fingertips, pull it off. Going to move to the one in the front. It's hard to see from this angle, and I will show you afterwards. It has a tab that we need to push towards the passenger side. Get your finger under there, index finger, push it towards passenger side and unlock it and then pull it off the hose so that's in use. It doesn't come all the way off because it's hitting the back of the outlayer, that's fine.
We're going to lift the EGR valve off of this tab. This one's kind of loose. If it's not that loose you can take a flat bladed screwdriver and just push the lock in a bit and slide it off the tab. It's going to come up. This hose is attached to it still, it's loose though, and I'm just going to pull it off of that hose. Put this aside for now.
I want to show you that lock that I'm talking about. On this vacuum hose, see if we can just slide it out here. You don't have to do any of this. I'm just going to show you how the connector works so I'm going to unplug out alternator just so I can slide the hose out here because this is a little tricky to figure out. The back side, this is underneath the valve, you need to push this open and that's what unlocks that.
If you're struggling with it, you're trying to get it off, this is the little tab you're trying to push to unlock it. I'm going to put this back where it belongs which is just down in here. Then we'll plug back in our alternator. This is our old EVAP purge solenoid, this is our new one from 1AAuto.com. It's the same style gray plugs on one end, it's the same tab, identical electrical connectors, and the same little vacuum nipples on the back. This will fit perfectly and get rid of any check engine light code you might have for an EVAP purge solenoid.
To reinstall this, I'm going to lift up this wiring harness, and I'm going to install this connector on this end first. See if I can do it where you can see it. Then we go like this. Just going to push in like that. You might have to unlock that tab. That's locked in and you slide it down underneath. Place it over the metal tab that it sits on. Just like that.
Now we're going to have to reconnect our electrical connector. I'm just going to adjust this weather seal so it's square. That's locked in. Take our other vacuum line and have to open it, pushing the white clip down, slide it over, make sure the white clip locks in like that. We've replaced our EGR purge solenoid.
Now we're going to put this engine cover back on. You've got these two little pins here and there's two little sort of clips in the back that this needs to slide up and into and then over these to lock it down. It's easier to slide it to the back and get these hooked and then push it down onto these. It's got a little bit of a curve here. There's some heater hose lines on the other side that they need to go over it like this, so you basically just start it, just kind of slide it down, and you can almost see it, and it hits those hooks, and then you push it over those pins and down and it's on.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
