Replaces
Part Details
Product Features
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we'll show you how to replace ignition coils on this. This subject vehicle is a 2003 VW Passat. It has the 1.8 Turbocharged or 1.8T motor which is the same for a lot of different VWs as well as Audis. The only tool you'll need is a large flat blade screwdriver on this vehicle. It may be a little different for the Audi if the engine vanity cover is different.
You want to remove this cover here. There are three little clips. Use a large screwdriver, turn 90 degrees, let them pop up, and 90 degrees, here. I'm going to tap it a little bit, 90 degrees. They pop up and then this cover rights up and off. Each coil has a little plug on. You just push on that tab and then pull the harness off. Obviously, if you're doing all four you do that for each one and then just kind of move the coil a little bit. Pull it right off and out.
The new coil from 1A Auto is just like the original. You go down in nice and straight and just press it right down in and reconnect it. It's a direct fit and then repeat for the rest of them.
Just place your cover back on. You could just use your oil filter or your oil filler as a centering point. Now use a screwdriver to press those down. Turn to 90 degrees.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
