Replaces
Replaces HID Ballast Control Module 2 Piece Set Dorman OE Solutions 1AESK00016
$559.95
Replaces VW Golf Jetta Front Driver & Passenger Side 2 Piece CV Axle Assembly Set GKN GKNK00104
$449.95
Replaces 2005 VW Jetta Sedan L4 1.8L Manual Transmission Front Driver & Passenger Side 2 Piece CV Axle Assembly Set GKN GKNK00075
$443.95
Replaces 2005 VW Jetta Sedan L4 1.8L Manual Transmission Front Driver & Passenger Side 2 Piece CV Axle Assembly Set GKN GKNK00219
$391.95
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace a side marker light on this 2004 Volkswagen Jetta, and we show you on the driver's side but the passenger's side is the same procedure. The items you'll need are a new side marker light from 1AAuto.com and a flat blade screwdriver.
Using a flat blade screwdriver we've wrapped in electrical tape so it won't scratch the paint, we just pry out the back while pushing in the front of the side marker light. Then you just pull your socket right out. On the left is the old side marker light. On the right is the new one from 1A Auto. You can see they're identical and they're going to fit exactly the same. If you're just looking to service the bulb, you just pull the bulb out and then push the new one in. Then you just push your socket into your new side marker light, push the front end in first and just hold it down. Then push the back in. Now using your flat blade screwdriver, pry it back out just a little bit on the front, and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
