Replaces
Part Details
TRQ side mirrors and mirror components are designed to match the function, fixture, and performance of the original version for easy installation. TRQ mirrors are DOT certified, comply with all federal safety standards, and are independently lab tested to ensure our products comply with all government regulations. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Exact fit - To obtain proper fit and function confirm your vehicle has the exact mirror options listed.
Paint To Match Note:
"Paint-to-match finish" refers to a smooth, paintable surface. This item is not painted. Paint offers better coverage and adhesion, but it is not necessary for installation.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video we're going to show you how to replace a side mirror on this 2004 Volkswagen Jetta, and we show you on the driver's side but the passenger side is the same procedure. The items you'll need for this are a new side mirror from 1AAuto.com, a flat blade screwdriver, Phillips screwdriver, T20 and T45 Torx bits, and a ratchet with an extension.
Start off by prying off this panel inside your pull handle. Now lift your switch panel up and out, and then just push the tab on this harness and disconnect it. Then, using a Phillips screwdriver, you want to remove these three Phillips screws. We'll just fast forward as Don removes those. At the bottom of your door panel, you want to remove these three T20 Torx bolts. We'll fast forward as Don removes those. Then just remove this Phillips screw up here in the top corner of your door panel.
Reach in behind the door panel and just pull out to release the clips. Then lift it up and out of the window sill and over the lock. Now pull this harness free and then push the tabs on either side and disconnect it. Then pull the harness from this foam. Now remove this T20 Torx bolt. Pry off the speaker and then pull back the insulation if it doesn't come with it. Then you want to remove this T45 Torx bolt, and we'll just fast forward as Don does that. Once that's removed, the mirror will pull off and out.
On the left is the old side mirror. On the right is the new one from 1A Auto. You can see they're identical and they're going to fit exactly the same. Our mirror is paint to match, so you can take your vehicle to an auto parts store with a paint department and have them give you an air charged spray can of the paint that matches your vehicle and then spray the mirror to match.
Feed the harness of your new mirror through the door and then push the mirror into place. We'll just fast forward as he holds it there and replaces that T45 Torx bolt. Now reconnect your harness and then push your speaker panel back into place. Push the bottom in first, over those wires, and then you just push the tab in at the top, into the door. Now replace that T20 Torx bolt, put your door panel back down into your window sill, then pull your wire harness for your switch back through, and then line up the clips on the back of your door panel and hit them into place. We'll fast forward as Don replaces and tightens up those three Phillips screws. Then replace those three T20s and replace that Phillips screw up in the top corner and tighten it up. Now reconnect your switch panel and then just push the panel down in place. Then line up this panel and push it firmly into place, and your all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
