★★★★★
November 3, 2023
Part arrived faster than estimated. Installed without any issues. The videos were a good aid.
Part was exact match. Easy installation.
Replaces
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Returns: Parts with electrical components cannot be returned once installed.
Left Hand Drive:
All of our auto parts are intended for Left Hand Drive USDM vehicles. If your vehicle is Right Hand Drive, please ensure the part is correct for your specific vehicle.
Attention California Customers:
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks!
In this video, we're going to replace the blower motor in this 2005 Volkswagen Jetta. The process is similar for this generation Jettas, as well as the Golf, and the Passat.
The blower motor is located behind the glove box. Go up underneath and there is a foam insulation or sound pad here. On this vehicle, you use a flat blade screwdriver and remove the two clips that hold it in place. Once the clips are removed, pull the pad down and out. The heater motor is up underneath. A little bit to the right, there's a tab that you pull down. I can probably pull it down with one hand, and then twist with the other. Pull down, twist, and then there's tabs that hold the motor in, so just twist right out. Then you want to pull on the air duct that has the holes in it, to the top of the screen, pull it back a little bit, and then pull the blower motor down. Then as it comes down a little bit it will probably get caught on the carpet a little bit, so reach up in there and pull it down the rest of the way.
Then your connection will vary depending on what options you have. This vehicle has automatic temperature control so there's two tabs on each side. Pry the tabs with the screwdriver and disconnect.
To reinstall, reconnect your new motor. Make sure it's secure, and then feed it up into place. You'll want to feed the cage up into the hole a little bit first, and then feed the side closer to the engine of the vehicle; feed that in first. You can feed it in actually a little too far at first, pull it back down, and then it goes up by that ducting. Then you need to line up tabs, and once you get it in twist it and lock it in place. Then reinstall the foam pad. Put it up into place. I usually put the side next to the glove box in first around those air duct holes. Then push the rest of it up and in around the edges. Then put the clips back in.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
HMA84794
Part was exact match. Easy installation.
This site helped me out a lot. Great fit or I would say perfect fit
product 1AHCX00234-VW HVAC Blower Motor Assembly TRQ HMA84794 was as describedm ffit was perfect worked perfecft, would buy again
It works fine. But I am disappointed on how loud it is on speed #1 when I turn it on low it sounds like it's on speed number 3 out of 4. Like I said it works good blows great and fits properly, just disappointed in how loud it is.
Replacing the fan was incredibly easy and quick. Many thanks to the installation video provided. Actually the only "tool" we needed was a flashlight. The fan itself is as good if not better than the OEM. It's quiet and blows plenty of cool air which living here in Arizona is a must. From the ordering to to delivery was 3 days. Our experience was 5 star with 1A Auto.
The fan is doing great! I had to replace several fans until I determined I had a problem with water from the automatic carwash coming in through the vent to the outside through the back of the engine compartment. I fixed that issue and this fan has performed great! I just love 1A Auto!!!
The product was damaged in shipping and quickly replaced without any fuss. The replacement motor installed easily. One note: the back of an OEM blower motor receives a plastic trim screw that must be threaded to hold a foam trim cover in place. The replacement motor does not feature a threaded female screw hole, and the hole that is there is too big for the trim screw. To me, that is not that big of a deal, for there is a second trim screw that holds the other side of the foam trim cover in place. But this is a flaw that needs to be addressed with the supplier, for it should be a relatively simple redesign of the relevant plastic injection mold.
The 1A Auto part was an exact factory match for my 2010 VW Passat. Their installation video helped me tremendously. Thank You very much.
works perfect got it in good time fit perfect
I was very pleased with the service I acquired when I phoned. I forget the girls name but she was very helpful. I will be ordering from 1A again, and will pass their name and reputation on to friends and family. Once again, thank you for your excellent service!
No, the resistor is not included.
It should fit a 2011. Many Jetta parts from 2006 - 2013 or 2014 are interchangable between years. The fan is doing great. Yes, I have manual temp controls on my 2010 Jetta.
Auto if you set a specific temperature. Manual if you just set a level of hot and cold.
no it don't . it is below the glove box to the right easy install
