Replaces
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
These side markers are actually . they can be pretty easy. You push in on the front, and the front goes below the bumper cover, and you try and slide it forward. It doesn't slide forward easily. Carefully insert a screwdriver right under here and get it to slide forward. While you're pushing it in get it to slide forward with the screwdriver and then it'll come out. You just pull firmly. There's your bulb. That just pulls from the socket. You can push this back in.
A new one from 1A Auto is exactly the same as the original. It has this little tab that floats. Reconnect the light. I kind of put the light in, like it should be, and push the front in, and get it to move forward, and then as you're pushing it in let it slide backwards. It comes back. You might need to just take your screwdriver, kind of push in on the light. Put the screwdriver right in, pry it forward, and pull the light out a little bit. There you go.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
On these markers here, they actually, see one side pushes in, push it in and use the small screw driver and work it into this, over here. Pry that way so you don't hurt your paint, then the light pops out. Disconnect it and your bulb just comes out. You want to push this right in.
New lights from 1A Auto if you've broken one. They're designed just like the original. Put the light in. Then force the harness back in. Put the light basically in place with this side is still on and push this side in. Slide it back, push this side in, slide it forward. You may need to cork your screw driver in. Just push it in, pry it, pull the screwdriver out. We may need to do that a couple of times. That's in place.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
