Replaces
Part Details
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Created on:
Tools used
Brought to you by 1AAuto.com. Your source for quality replacement parts and the best service on the internet. Hi, I'm Mike from 1A Auto. I hope this How To Video helps you out, and next time you need parts for your vehicle think of 1AAuto.com. Thanks.
In this video, I'm going to show you how to replace or just service the side parking lights on this 2001 Passat. Same as any '98 to '01 Passat. No tools are needed for the driver's side. You will need a Phillips screwdriver for the passenger's side. The driver's side is pretty easy. Everything is pretty open here. There's actually a little ring here. You pull that and release it. Just kind of reach in behind. You have to break the light loose, pull it forward. If you're just looking for service a bulb, counterclockwise to release it, clockwise to lock it in there. The new light, you would need to move this spring. Just twist the spring off, put it on your new light. Obviously, my lights are in fine shape here. Go ahead and put it into place, bulb in. Just make sure you line everything up. Clockwise to lock it. There's a few tabs in the back, then a tab here that goes into a tab on the headlight or swab headlight. Just make sure you put the light in correctly. Then, again, pull back and lock it on right there.
Passenger's side is pretty much the same. There's just an air intake duct in the way. Here, this just comes right up and off right there, 2 Phillip screws. Grab the back of your duct, pull it off, and pull that out. Now, you can see you can get right back there just like the other side. Put the duct in into place. Make sure this part here is in place correctly. Again, snap that together and put your screws back in. This right here, one of your tabs, goes right in there. Get that lined up. Then the back one usually pretty much lines itself right up.
We hope this helps you out. Brought to you by www.1AAuto.com. Your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free: 888-844-3393. We're the company that's here for you on the internet and in person.
