Genuine original equipment part (OEM) that was factory installed on your vehicle by the manufacturer.
Install Tip: Keep & reuse your original hardware, new hardware is not included with this item.
Item Condition:New
1 Year Warranty
This item is backed by our 1-year warranty. In the event this item should fail during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Install Front Mud Flaps 2011-15 Ford F-350
Created on:
Tools used
Impact Screwdriver
Socket Extensions
Universal Joint
5.5mm Socket
8mm Socket
Ratchet
1. Installing the Front Mud Flap
Remove the two front facing 5.5 mm screws
Remove the front 8 mm bolt at the rear corner of the wheel well
Align the mud flap with the mounting holes
Replace the 5.5 mm screws
Replace the 8 mm bolt
Hey, everyone. Sue here from 1A Auto, and today we have a 2015 F-350 in the shop. And we're putting on front mudflaps. Nice molded mudflaps from 1A Auto, even has the symbol for Ford on it. Real easy steps. Let's do it.
So it's going to sit up in here just like that. You need a 5.5 millimeter socket, and you're going to undo these two front screws here inside the fender well. You could always use turn your steering wheel if it's easier for you. I just have a little quarter inch swivel that I'm going to use. And then down below here, it's an eight millimeter socket. We're going to take this bolt out right there. And the kit comes with a replacement bolt for that. So that's really cool. Got a nice, new clean black bolt with good threads.
So you're going to just line that right up. Put the rubber part on the outside of that, and I'm just going to line that bolt up. Start it with my hand. Replace the two front fender well screws. 5.5 millimeter socket ones. Line those up. I'm going to do the small ones first, tighten those up. Going to hold the mudflap right where I want it to be.
Put my eight millimeter socket on. This is how fast and easy this job is. Done.
Thanks for watching. Visit 1Aauto.com, your place for DIY auto repairs, for great parts, great service, and more content.
BC3Z-16A550-GA
In Stock
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.