WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
How to Replace Vapor Canister Purge Solenoid 2000-05 Chevy Monte Carlo
Created on:
Tools used
Socket Extensions
10mm Socket
Ratchet
1. Removing the Vapor Canister Purge Solenoid
Remove the solenoid harnesses
Remove the hoses from the solenoid
Remove the 10mm bolt from the solenoid
Lift the solenoid up and out
2. Installing the New Vapor Canister Purge Solenoid
Push the hose into the new canister
Feed the canister back into place
Replace and tighten the 10mm bolt
Push the hoses back into place
Reconnect the two harnesses
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the vapor canister purge solenoid on this 2003 Chevy Monte Carlo with the 3.4L V6 engine. It's the same part and some of the process on these Monte Carlos from 2000 to 2005. The items you'll need for this include a new vapor canister purge solenoid from 1AAuto.com, a 10mm socket, and a ratchet with an extension.
Start off by just pushing the tab, disconnecting that harness, lifting the tab, and disconnecting this harness. Then pull that tube free. Push this tab in and pull this tube free. Then you want to remove that 10mm valve.
Once that's removed, you can lift your solenoid up and out. On the left is the old vapor canister purge solenoid, on the right is the new one from 1A Auto. You can see they're identical, and they'll fit exactly the same. Push the hose into your new vapor canister purge solenoid. Once you have it pushed in all the way, fit it back into place. Then just replace that 10mm valve and tighten it up. Push this hose back into place. Then this hose. Then reconnect your two harnesses, and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
EVA47769
In Stock
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Pontiac is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Pontiac or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.