Part Details
-
Wrench Size:
22 mm
-
Thread Diameter:
18 mm
-
Universal Or Specific Fit:
Specific
-
Wire Quantity:
4
-
Connector Gender:
Male
-
Overall Length:
28.74 in
730 mm
-
Thread Size:
M18x1.5-6e
-
Connector Shape:
Square
-
Mounting Type:
Threaded
-
Terminal Gender:
Male
-
Sensor Type:
Heated
-
Band Type:
Narrow
-
Wiring Harness Length:
23.7 in
602 mm
-
Sensor Design:
Thimble
-
Terminal Quantity:
4
-
Grade Type:
Regular
Specification
Engine Displacement (Metric)
TRQ oxygen sensors are manufactured to precise specifications using premium raw materials to optimize your vehicle’s emission system. Each sensor is isostatically-pressed for improved strength and durability, and plasma-sprayed to improve sensitivity and prolong the service life of the sensors. Oxygen sensors wear out over time and should be replaced every 60,000 miles to prevent poor engine performance. TRQ recommends replacing the oxygen sensors in sets to optimize fuel economy and reduce overall emissions. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Application Specific Design: No modifications and pre-calibrated
Isotatic-pressed and plasma-sprayed for extended service life
Double-Layered 310S Stainless Steel: Additional protection from moisture and debris
Restored Engine Performance: Improved fuel economy and lower emissions What is Upstream vs. Downstream?
- Upstream location is between the catalytic converter and the engine
- Downstream location is between the catalytic converter and the tailpipe
Install Tip: You may be required to reset the vehicle computer after installation of this part.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.